Can the crossbar be modified?
Pay attention to the balance pole is not random, must be optimistic about the texture and workmanship, the balance pole is not to say that the higher the strength, the better, it is not to say that the more toughness, the better, the strength is too high, a long time will let you hang above, that is, you install the balance pole in the body hole position, Deformation occurs (because the balance pole is too rigid and the distortion caused by high-speed corners cannot allow the toughness of the balance pole to remove the force.
When the suspension deformation on both sides is unequal and the body tilts horizontally to the road, one side of the frame moves close to the spring support, and the side end of the stabilizer bar moves upward relative to the frame, while the other side of the frame is far away from the spring support, the corresponding stabilizer bar end moves downward relative to the frame, but when the body and the frame tilt, The middle of the transverse stabilizer bar has no relative motion to the frame.
In this way, when the body tilts, the longitudinal part on both sides of the stabilizer rod deflects in different directions, so the stabilizer rod is twisted, and the side arm is bent, which increases the Angle stiffness of the suspension.