How to adjust the gap of the engine cover?
The adjustment method for the gap of the engine cover is as follows:
1. There is a black rubber pier on the left and right of the water tank frame behind the central net, which is used to withstand the cover of the machine. Rotate the black rubber pier left and right by hand to adjust the gap between the cover and the center net;
2, open the hood, the left and right sides of the three fixed fender screws, one in the rear of the headlight, one in the hood under the innermost sponge, one in the middle. Loosen these three screws and pull the fender outward a little until you feel that the hood is not wide enough to tighten the screws;
3, there are two plastic blocks on the lid there are two at the front, the soft plastic can be rotated in the end, there are two U-shaped tongues on the left and right of the hood, take off the plastic clip on the right side of the adjustment.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts, welcome to buy.