What is the effect of air leakage in the car air filter tube?
Air leakage will affect the match between the actual intake volume and the engine, and the back and forth matching adjustment has a great influence on the engine efficiency. Replace the parts as soon as possible.
The role of car air filter:
Car air filter is mainly responsible for removing particulate impurities in the air. When the piston machinery (internal combustion engine, reciprocating compressor, etc.) works, if the air contains impurities such as dust, it will aggravate the wear of the parts, so it must be equipped with an air filter. The air filter is composed of two parts: a filter element and a housing. The main requirements of the air filter are high filtration efficiency, low flow resistance, and can be used continuously for a long time without maintenance.
The car engine is a very precise part, and the smallest impurities will damage the engine. Therefore, before the air enters the cylinder, it must first pass through the fine filtration of the air filter to enter the cylinder. The air filter is the patron saint of the engine, and the condition of the air filter is related to the life of the engine. If the dirty air filter is used in the car, the engine intake will be insufficient, so that the fuel combustion is incomplete, resulting in unstable engine work, power decline, and increased fuel consumption. Therefore, the car must keep the air filter clean.
What is the effect of air leakage in the car air filter tube
The air leakage of the air filter pipe will make the air inhaled during the work directly into the cylinder without going through the air filter, and the dust impurities in the air will also directly enter the cylinder to produce serious friction, directly causing the wear of the cylinder liner piston and other components, and the consequence is that the burning oil power will decline.
The intake pipe connected to the air filter is leaking oil
1, should be the crankcase ventilation pipe, the leakage is the exhaust gas containing oil steam, by plugging in the waste gas valve to achieve oil and gas separation, exhaust gas through the valve under the other negative pressure tube suction combustion chamber, oil flow back to the tank. Where there is a leak in your pipe joint, clamp it with a clip, and then see if the negative pressure pipe is connected and blocked.
2, is the forced ventilation pipe is blocked, mostly pipe blockage or PVC valve failure.
3. The crankcase ventilation pipe is in the lower part of the cylinder block, and the surface of the intake pipe is installed.
4. Replace the gasket of the intake pipe: If the gasket of the intake pipe leaks due to aging, rupture, or deformation, you need to replace the gasket. You can go to a professional car repair shop or 4S shop for replacement. Check the fastening bolts of the air intake pipe: Loose or damaged bolts of the air intake pipe may cause air leakage.
5, the main reason for the oil leakage of the engine cover and the body connection pipe is that the valve chamber cover pad material is not good, the situation of aging and hardening for a long time, resulting in oil leakage of the engine, and the valve chamber cover pad can help solve the oil leakage phenomenon.
How to disassemble the car air filter?
Car replacement air filter method:
1. Open the hood of the car, find the air filter box, some boxes are fixed with screws, some are fixed with clips, and screws need to be opened with a screwdriver;
2, fixed with a clip, directly open the clip on it, take out the old air filter in the box, in order to prevent dust and other debris falling into, with a clean towel to block the intake pipe;
3, the air filter is divided into the filter element and the shell, the filter element undertakes the filtering work of the gas, plays the role of filtering the dust and sand in the air, and ensures that the cylinder enters sufficient and clean air;
4, however, many places contain more dust and sand in the air, which will easily cause air filter blockage, resulting in the engine is not easy to start, acceleration weakness, idle instability, increased fuel consumption and other symptoms, at this time, it is necessary to replace the air filter;
5, replace the new air filter, fasten the clip (or screw on the air filter box cover with a screwdriver), and put down the hood.
Open the engine hatch and locate the air filter. The cover of the air filter on the clamp ring break, the air filter out the filter element (there is a clamp ring, there is a screw to see your car is the kind of), remember to clean the box of the air filter, the new air filter is installed back in the original position, pay attention to the installation direction, buckle the air filter cover, the spring clamp is replaced.
Replace the air filter, you need to first find where the air filter is, open the hood can be seen, only need to open the upper cover of the filter, and then install it, pay attention to the installation direction.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
