Does the glass kettle interface leak normally?
1, hello, it should be filled with water, the water bottle and the water pipe connection is not sealed well leading to water leakage, it may also be the glass water tank leakage, I hope to help you, if you are not clear, please login Baiche Bao answer to find me.
2, there is a gap between the glass water kettle and the lead pipe, and more glass water will leak out from that position.
3, the causes of glass water leakage are: the first is the glass kettle leakage. The second is that the pipeline is damaged and leaking. The third is the failure of the wiper spray motor. Specific causes need to be further examined and ruled out.
4, hello friend, the car that, the water nozzle inside the wiper water bottle is installed separately, if the sealing of the leather ring at the interface is not strict, there will be water leakage. It is recommended that you go to the repair shop, let the master check for you, and replace the sealing ring should be fine.
5, glass insulation pot if the diagonal water leakage, usually means that there is a problem with its sealing performance. A good glass thermos should be sealed to ensure that the stored liquid does not leak out or evaporate, thereby maintaining the temperature.
6, there may be several reasons for glass water leakage: the addition is too full, the water cover is not covered, and in the process of the car, it leaks out. The rubber sleeve of the contact point between the sprinkler motor and the glass kettle is aging. The water pipe of the sprinkler motor is cracked.
How to replace the wiper spray pipe?
1, the first step, we need to remove the front wheel of the car. After unscrewing the screw with a screwdriver, remove the sand cover so that you can see the kettle. Then, directly unplug the water pipe on the kettle, and insert a new water pipe of the same model, so that the wiper spray pipe is replaced.
2, for the replacement of the wiper spray pipe of the Volkswagen Lavida model, the steps are similar. Also need to remove the front wheel, then twist the screw, remove the sand cover, see the kettle, unplug the old water pipe and insert the new water pipe to complete the replacement.
3, If you want to replace the wiper pipe for the new Xuan Yi, you need to first find the location of the glass water hose. After opening the engine hood, remove the front bumper, then remove the old glass water hose and replace it with the new one. Also, lift the wiper arm from the windshield.
4, if the wiper can not spray water normally, it may be a water tank, water pump problems or fuse burned. Generally speaking, the wiper nozzle has a card design, you can use the flat mouth to press the card on both sides, so that you can remove the nozzle. If this does not work, you can also try using a small screwdriver to push it out.
5. When replacing the rear windshield wiper nozzle of the Emgrand, you must first find the location of the nozzle. You can directly use the screwdriver to lift the nozzle, because it is a buckle structure, you do not need to use too much force.
6, before replacing, first open the hood of the car, and then unscrew the cover of the wiper spray bottle. After filling the glass cleaner, tighten the lid of the spray bottle and close the hood. Look for the position of the scrubber on both sides of the front of the cab. If the position prevents the addition of cleaning fluid, you can remove the scrubber from the hanging position, and then open the plastic tank of the scrubber to replace it.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
