Where's the back door trim.
A decorative component inside the rear door of a car
The rear door trim panel is a decorative component inside the rear door of a car.
The rear door trim panel is a part of the interior and exterior trim of the car, and its main function is to cover the metal door panel, provide a beautiful appearance, and meet the requirements of ergonomics, comfort, functionality and convenience. It forms the overall interior structure of the door together with related components such as the door interior trim panel and the triangular trim panel. The installation of the rear door trim plate usually involves the coordination and fixing of multiple components, such as the installation of the triangle trim plate on the door interior trim plate through the interference coordination of the column and the nylon guard ring. When removing or replacing the rear door trim panel, you need to follow certain steps, including opening the door, removing the fan inner box, and removing the electric rearview mirror switch connector, so as to complete the work safely and effectively.
In addition, the design and material choice of the rear door trim is also an important factor to consider, to ensure that it can meet aesthetic needs, but also provide a good use experience and safety. For example, the rear door body skeleton is usually made of materials with certain strength and rigidity to provide structural support and protection. At the same time, the installation and removal process of the rear door trim requires careful operation to avoid damaging the paint film or other components.
Possible causes of abnormal noise in the door interior panel include:
1. The latch of the door trim plate resonates, generating abnormal sound. In response to this problem, owners can try to open the door trim panel, check the location of the buckle, and eliminate the abnormal noise by wrapping tape or adding padding in the gap.
2. The window glass is loose. At this time, you can roll the window glass to the half open state, and gently shake with your hand, if the shaking amplitude is large, it indicates that there is a problem with the glass fixing.
3. The audio or lifting mechanism inside the door is loose. By removing the door trim panel, check whether the internal components are loose. If they are loose, repair them in time.
The main reasons for the abnormal sound of the tail door are:
1. The lock resonance is abnormal. When the trunk is closed, the lock of the vehicle may collide during driving, resulting in an abnormal sound from the rear door. In this case, you can try to apply lubricating oil for relief. If the effect is not good, you can consider wrapping an appropriate amount of black tape on the lock, but be careful not to wrap too much, so as not to affect the normal closure of the tail door.
2. The sealing rubber strip is aged or the interior panel of the tail door is detached or loose. Aging of the sealing rubber strip will cause resonance abnormal sound of the tail door. If the sealing rubber strip is in good condition, check whether the interior panel of the tail door is secure. If it falls off or loosens, it should be repaired in time. Such problems can generally be handled on their own.
Back door decorative plate removal steps detailed, let you easily get it done
1. Prepare tools
1. Screwdriver; 2, plastic disassembly tools;
Second, disassembly steps
1. Open the back door and find the screw head on the rear door decorative plate; 2. Loosen all the screw heads with a screwdriver;
3. Gently loosen the rear door decorative plate from the door with a plastic removal tool; 4, lift the decorative board up, and gently remove it.
Third, precautions
1, before removing the rear door decorative plate, it is best to close the door; 2. Be careful when using plastic removal tools to avoid scratching the surface of the door; 3, remove the rear door decorative plate should be handled gently, so as not to hurt the decorative plate.
Through the above steps, you can easily complete the removal of the rear door trim panel. If you are disassembling for the first time, it is recommended to watch some relevant videos or ask professionals to help, so as not to cause unnecessary losses.
In general, the removal of the rear door decorative plate is not complicated, only need to prepare the tools, operate in accordance with the order, and pay attention to it, you can successfully remove it.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
