The mirror turn signal doesn't work.
The reasons for the failure of the reverse mirror turn signal may include relay failure, excessive contact gap, faulty turn switch, burnt out of the turn signal bulb, poor contact of the turn signal cable, open, short, open circuit of the turn signal power cord, and damaged turn signal fuses.
Relay fault: Check whether the flash relay live wire is powered. If no power, check whether the line is disconnected from the power supply. If there is power, use a screwdriver to connect the two terminals of the flash relay. When the turning light is on, it indicates that the flash relay is faulty and should be replaced in time.
Contact gap is too large: Open the flash relay cover and check whether the coil and resistance are intact. If the resistance is hot, and the contact can not be closed, you can press the active contact, at this time if the turn light, indicating that the contact gap is too large, should be adjusted.
Steering switch fault: If the turn signal is not on, it may be that the steering switch is faulty, you can use a screwdriver to connect the steering switch live wire and the left and right light wire terminals. If the light is on, it indicates that the steering switch is faulty and should be removed for maintenance or replacement.
Turn signal light bulb burnt out: If the turn signal is not bright, one of the main reasons is that the bulb is burnt out. If this happens, the turn signal bulb should be replaced.
Poor turn signal wiring contact: poor turn signal wiring contact will also lead to the turn signal can not light up, the owner should find a professional electrician to reconnect.
Turn signal power line open, short circuit, break: turn signal power line open, short circuit, break, turn signal can not light up, should find a professional electrician maintenance.
Turn signal fuse damage: If the turn signal is not bright, it may also be because the turn signal fuse is damaged or burned out, the owner can replace the fuse.
For these possible causes, the owner or maintenance personnel can investigate and solve according to the above guidance.
How to operate the mirror button
The operation of the mirror button mainly involves several steps, including the steps to adjust the left and right mirror and the center mirror, as well as some precautions.
Adjust the left and right mirrors:
Stay in the driver's seat and maintain your normal driving position.
Use your left or right hand to reach for the mirror on the left or right side of the vehicle and find the adjustment button.
The adjustment button is usually located at the bottom or side of the mirror.
Gently press or rotate the button to watch the Angle of the mirror change.
When the Angle is right, release the button to complete the adjustment.
Adjust the center mirror:
Locate the central mirror adjustment button located inside the vehicle.
This button is usually located near the driver's seat and may be a knob or a push-pull switch.
As needed, gently press or rotate the button to watch the Angle of the central mirror change.
When the Angle is right, release the button to complete the adjustment.
Note:
Before adjusting the reverse mirror, please ensure that the vehicle has stopped, to avoid adjusting the reverse mirror during the driving process to cause blurred vision, affecting driving safety.
These steps and precautions help the driver properly operate the mirror button to ensure the best view during driving.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
