Front door can not open how to solve? What if the front door leaks?
When the front door cannot be opened, the following methods can be taken to try to solve the problem:
After unlocking with the car key, lock the car again, repeat twice, and then try to unlock with the central lock button.
If the door is frozen, try pouring hot water on the door cracks and handles, or waiting for the temperature to rise at noon to try to open it.
Check the lock block cable for failure, if necessary, replace the lock block cable.
Verify that the child lock function is enabled, if so, use a word screwdriver to turn the child lock off.
If the problem is caused by the remote control or the key running out of power, you can try to open the door with a spare key or a mechanical key.
If the signal interference is causing the key to not open the door, you can try to drive the car to a place without signal interference.
If none of the above methods can solve the problem, a professional may be required to check whether the connection device of the door handle and door lock is faulty.
If the problem still can not be solved, it is recommended to contact a professional lock company or auto repair shop for professional treatment.
The treatment method of front door leakage mainly includes the following steps:
Clear the cause of water leakage: First of all, you need to determine the cause of water leakage, common reasons include the door seal seal is not tightly sealed, the water outlet under the door is blocked, and the waterproof film inside the door is damaged.
Check and replace the seal: If the leakage is caused by the door seal seal is not tightly sealed, check whether the seal is seriously damaged or deformed. If you find a problem, you can replace the seal or adjust the door position, so that the seal and the door closer contact, reduce the possibility of water leakage.
Clean the water outlet: If the water outlet under the door is blocked and caused by water leakage, gently open the sliver under the door, find the square water outlet, clean up the accumulated silt debris, and ensure that the water can be smoothly discharged.
Replace the waterproof film: If the water leakage is caused by the damage of the waterproof film inside the door, a new waterproof film needs to be replaced. This may involve removing the door trim and then replacing the damaged waterproof film.
Repair with snake glue: For the damage of waterproof film, you can evenly spread snake glue on the crack to repair. This is a simple repair method, suitable for not serious damage.
Clean up the water in the car: After dealing with the water leakage problem, you also need to clean up the water in the car. After using a towel to wipe off the water, you can dry the remaining water with a small air gun. If the foot mat is wet, it needs to be dried in the sun or re-cleaned before drying.
Through the above steps, you can effectively solve the problem of water leakage in the front door. In the process of treatment, pay attention to the maintenance of the door seal, regularly clean the seal, and avoid the use of high pressure water nozzle directly aimed at the seal, so as to delay the aging speed of the seal.
Gap between front door and leaflet
The gap between the front door and the blade can be solved by adjusting the screw of the blade.
First of all, you need to check whether the installation connector is crooked, and if you find that the leaf plate and the trunk cover are deformed, you need to check whether the screw hole is deformed by the impact. Secondly, adjusting the gap is a key step, should first adjust the gap between the leaf plate and the door, then adjust the gap between the leaf plate and the cover, and finally adjust the gap between the headlight and the cover. If the above method can not solve the problem, it may be that the sheet metal repair is not done, at this time, you need to return to the factory repair, by adjusting the screw of the blade can solve the problem of the front door and the blade gap.
In addition, if the clearance between the front fender and the front door is large and small, it may be due to the wear of the door hinge, the displacement and deformation of the front engine and other parts caused by the gravity of the vehicle parts. In this case, in addition to the above adjustment methods, it is also necessary to consider the specific circumstances of the vehicle, such as whether it is an old model or a vehicle that has been used for a long time, and whether the clearance is changed due to the damage and deformation of the front body.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
