How to install the front bar bracket of the car leaf board？
1, the car front bumper bracket installation method: install the front bumper energy absorption block in the front bumper, and then install the front fog light on the front bumper. Insert the front fog lamp harness plug into the fixing seat. Install the front bumper sub-assembly embedded bracket into the front beam of the engine room and fix it with nuts.
2. First, attach the front bumper middle bracket to the front-end module, and use screws to fix it according to the specified torque. At this time, it is necessary to pay attention to the fixing order marked on the parts, so as to prevent the rotation of the middle support when tightening and affect the matching of the bumper.
3, first of all, the Great Wall Xuanli (check the transaction price | with | preferential policy) front bumper left and right side brackets were attached to the wing board side flange. Secondly, tighten the screws according to the specified torque, and connect the bumper harness with the body harness connector. Finally, lift the bumper and hang it on the front support bracket for installation.
4, the installation of fasteners and the correct position of the support plate installed on the bolt. Install the front bumper leaf plate from the outside to the inside, and place the installed front bumper on the support plate to connect with the body. Secure the mounting plate to the front bumper blade and tighten the retaining bolts.
What if the front bar bracket is broken
When the front bar bracket breaks, the damaged bracket should be replaced decisively. The specific steps are as follows:
Remove the old bracket: You first need to remove the screws or other fasteners from the broken bracket in order to be able to remove the old bracket.
Install the new bracket: Place the new bracket in place and attach it to the vehicle with screws or other appropriate fasteners.
Testing and adjustment: After installing the new bracket, ensure that the bumper can be firmly fixed to the bracket, and make the necessary adjustments to ensure that it works properly.
If you have certain hands-on ability, you can replace it by yourself; Otherwise, it is recommended to go to a professional auto repair shop for replacement to ensure the safety and correctness of the operation.
Car front bar bracket replacement
The steps to replace the front bar bracket are as follows:
Preparation: First, you need to remove the screws that are fixed to the front of the headlight. Next, notice that there is a plastic bumper bracket on the leafboard, make sure that the bracket is positioned correctly, and install it in place.
Connecting electrical components: When installing the front bumper cover, be sure to pay attention to the correct positioning of the inner plate of the front wheel cover. As directed, align the bumper cover with the lock bracket in the direction of the arrow until the hook is firmly attached.
Secure the bracket: Attach the bracket with tapping screws or bolts to ensure stability, especially with lock nuts to prevent accidental loosening. Install the bracket carefully to avoid unnecessary force and weight trouble.
Removal and installation: Start the vehicle, turn the wheel to the right, then close the hood and disconnect the negative battery. Remove the four screws from the front bumper with a Phillips screwdriver. Note that when opening the front cover, observe the condition of the headlamp screws first, usually need to remove the two headlamp screws and the following three screws to fix the bumper.
With the above steps, you can successfully complete the installation of the front bumper bracket of the Ex. During the operation, it is necessary to pay attention to details and ensure that each step is executed correctly to avoid unnecessary trouble and security risks.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
