The position and function of automobile radiator support.
The car radiator is located in front of the engine. Its function is to dissipate heat.
Car water tank, also known as radiator, is the main component of the car cooling system, its function is to heat, cooling water in the jacket absorb heat, heat flow into the radiator, and then return to the jacket cycle, to achieve the purpose of temperature control, is an integral part of the car engine.
Radiator its most direct role is to heat, the name can think of the meaning of the words. The radiator and the water tank are jointly used as the heat dissipation device of the car, in terms of its material, the metal is not corrosion resistant, so it should be avoided from contact with corrosive solutions such as acid and alkali to avoid damage. When adding water to the car radiator, the water tank cover should be slowly opened, and the body of the owner and other operators should be as far away from the water inlet as possible, so as not to cause burns caused by high pressure and high temperature oil and gas ejecting the water outlet.
Car water tank leakage the simplest way to repair
Car water tank leakage simple repair method
1. Check whether the cover is tight: First, we need to check whether the water tank cover is tightly fastened. Sometimes, when the vehicle encounters bumps in the road, the coolant will leak out because the lid is not tightened. Make sure the lid is completely sealed to prevent leaking problems.
2. Use special plugging agent: When it is found that the coolant leaks due to the damage of the water tank, you can consider using the special strong plugging agent for the water tank to repair. This plugging agent is very effective for small size damage (within 1 mm) and can temporarily solve the problem. However, it should be noted that this is only a temporary solution, and it is still necessary to replace the tank to completely solve the problem.
3. Go to the auto repair shop: If you can't find the cause of the leak or the water tank damage is too large, the aging is serious, it is best to go to the auto repair shop for repair as soon as possible. Professional technicians can carry out a comprehensive inspection, and recommend the replacement of the water tank according to the situation, in order to avoid excessive leakage of coolant, affecting the engine cooling effect.
4. Pay attention to the quality of the water tank: In addition, when repairing the water tank leakage problem, we also need to pay attention to the quality of the water tank. In some cases, poor tank quality may lead to leakage problems. Therefore, regularly check whether the water tank is damaged or aging, and replace the water tank in time if necessary to ensure the normal operation of the car.
Automobile water tank disassembly operation process detailed explanation
Car water tank is an important part of the engine cooling system, regular inspection and maintenance is necessary. This article will explain in detail the disassembly steps of the car water tank to help the owner or repair personnel to carry out self-maintenance.
1. Preparation
1. Safety first: Before starting any car repair work, ensure that the vehicle is turned off and disconnected from the power supply to avoid the risk of electric shock. At the same time, use jacks and solid brackets to lift the vehicle, and place stop slides under the wheels to prevent the vehicle from moving.
2. Tools: You need a suitable set of tools, including wrench, screwdriver, funnel, cleaning cloth, etc.
Two, disassemble the car water tank
1. Drain the coolant: Find the drain valve under the tank and open it to drain the coolant. Note that the coolant can be very hot, so be careful when handling it.
2. Remove related connectors: After the water drain valve is closed, remove the water inlet pipe, outlet pipe, fan and other connectors of the water tank. Remember the position of each component for reference during installation.
3. Remove fixings: Usually, the water tank is fixed to the frame by bolts or brackets, and use a wrench to loosen and remove these fixings.
4. Remove the tank: Gently remove the tank after making sure that all fasteners have been removed. Note that if the tank is in contact with the radiator grille or other components, it needs to be handled carefully to avoid damage.
Three, install a new water tank
1. Clean installation position: Before installing the new water tank, ensure that the installation position is clean and free of impurities, and wipe it with a clean cloth if necessary.
2. Install fasteners: Place the new water tank in the correct position, and then gradually install fixing bolts or brackets to ensure that they are firm.
3. Remove the tank: Gently remove the tank after making sure that all fasteners have been removed. Note that if the tank is in contact with the radiator grille or other components, it needs to be handled carefully to avoid damage.
Three, install a new water tank
1. Clean installation position: Before installing the new water tank, ensure that the installation position is clean and free of impurities, and wipe it with a clean cloth if necessary.
2. Install fasteners: Place the new water tank in the correct position, and then gradually install fixing bolts or brackets to ensure that they are firm.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
