Clutch plate is a kind of composite material with friction as the main function and structural performance requirements. Automotive friction materials are mainly used in the manufacture of brake friction plate and clutch plate. These friction materials mainly use asbestos based friction materials, with the increasingly high requirements for environmental protection and safety, gradually appeared semi-metallic friction materials, composite fiber friction materials, ceramic fiber friction materials.
Because the friction material is mainly used in the manufacture of brake and transmission parts, it requires high and stable friction coefficient and good wear resistance.
The clutch is a kind of mechanism which transmits power through axial compression and release with the help of two clutch friction plates with flat surface. The greater the axial pressure of the two clutch plates, the greater the friction force generated, and the more stable and normal the operation of the extruder is transmitted. In normal operation, the machine generally shows stable operation and no noise; Under the rated load the clutch disc will not slip, will not get stuck, will not disengage; At the same time, after the clutch plate is separated, it should also be separated from the brick machine to stop running completely, without other noise or two clutch plates are not completely separated and so on. Therefore, it is necessary to adjust the clutch in the gap, the gap will cause the clutch disc slip, damage the clutch disc, the gap will make the clutch disc is not easy to separate and so on