How the car trunk lock works？
The working principle of the car trunk lock mainly involves the movement of the lock core, and the locking and unlocking function is realized through the spring and the lock tongue. In particular, the lock is usually composed of a lock shell, a lock core, a lock tongue, a spring and a handle. When it is necessary to lock the suitcase, by operating the handle, the lock core moves and pushes the latch out, thus locking the suitcase. On the contrary, when it is necessary to open the suitcase, the lock core is moved in reverse by operating the handle, and the lock tongue retracts, allowing the suitcase to be opened. This process relies on the elastic action of the spring to ensure the smooth operation of the lock.
In addition, there are some modern car trunk locks that use electronic systems, such as motor drives. In this case, the owner can control the opening of the suitcase by using a specific button on the car key or a switch inside the car. Such systems usually include electronic sensors and actuators that can automatically lift or open the trunk lid by motor after receiving instructions from the owner.
Car trunk lock won't open what's going on
1. Key problem: It may be that the car key has no power or the internal mechanical structure of the key is damaged, resulting in failure to trigger the trunk unlock.
2. Trunk lock mechanism failure: The trunk lock mechanism may not open normally due to long-term aging or damage.
3. Electronic control system failure: the electronic control system of the trunk fails and cannot receive and respond to unlocking instructions normally.
4. The door is faulty: The hinges and springs of the door are worn or damaged. As a result, the door cannot be opened properly.
5. Vehicle anti-theft system lock: In the case of vehicle anti-theft system start, the trunk may be locked, you need to enter the correct password to unlock.
The solution:
1. Replace the car key battery or go to a professional shop to repair the key.
2. Go to a professional auto repair shop to check and repair the trunk lock mechanism.
3. Check the trunk electronic control system and make necessary repairs.
4. Check the components of the backup door and repair or replace them.
5. Contact professional technicians to unlock the anti-theft system of the vehicle.
The disassembly method of the car trunk lock block mainly involves the following steps:
First, you need to open the trunk from inside the car, so that you can directly observe a plastic cover plate in the top position.
Loosen the screws on the cover using a screwdriver and remove . This step is to open the cover plate for further operation.
If there is a problem with a trunk lock, there are two main solutions : one is to replace the entire lock block, the other is to make repairs. The specific dismantling and repair methods will vary depending on the model and the specific type of lock.
For example, for the Volkswagen Lamdo model, the steps to remove the trunk lock block include:
Open the trunk from inside the car and find the plastic cover at the top.
Use a screwdriver to loosen and remove the screws from the cover plate.
After removing the plastic plate, you can further inspect or replace the trunk lock block.
For different types of models, the disassembly method may be different, but the basic steps are similar, you need to open the plastic cover plate first, and then remove the screw and check or replace the lock block according to the specific situation. It is recommended to refer to the vehicle's owner's manual or contact a professional automotive repair service for more detailed instructions when performing a disassembly operation.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
