Trunk lid.
Some known as "two and a half" cars, the luggage compartment extends upward, including the rear windshield, so that the opening area increases, forming a door, so it is also called the back door, so that both to maintain a three-car shape and easy to store items.
If the back door is used, the inner plate side of the back door should be embedded with a rafter rubber seal, around a circle to waterproof and dustproof. The support parts of the suitcase lid are generally hook hinges and four-link hinges, and the hinges are equipped with balance springs to save effort to open and close the lid, and can be automatically fixed in the open position to facilitate the extraction of items.
The trunk lid won't close
1, the trunk loaded with too many items, at this time the trunk of the car can not be closed, the solution: the owner as long as part of the items can be taken out.
2, the trunk of the lock block failure, which led to the trunk of the car can not be closed, the solution: at this time the owner needs to go to the repair shop for professional maintenance.
3, the hinge of the trunk appears loose deformation, this situation will lead to the trunk of the car is not tight, the solution: you can observe whether the folding screw falls off, if the screw falls off, you can tighten the screw according to the standard, but if the hinge appears deformed, then the car can only be sent to the repair shop for maintenance.
4, the pull rod inside the handle is stuck or the hydraulic support rod is faulty, the solution: the need to carry out the maintenance of the pull rod or hydraulic support rod.
5, the switch of the trunk is damaged or the control unit of the system is faulty, this situation generally appears in the case of the trunk is automatic, the solution is to find a professional switch and control unit maintenance.
6. The closed limit rubber block of the car does not match the locking mechanism of the car, and the trunk of the car cannot be closed. The solution is to re-match the limit rubber block with the locking mechanism of the car.
7. The lack of lubricating oil inside the trunk door lock causes the parts to jam and cannot work normally. Solution: Add lubricating oil and then operate.
8, there is a foreign body the trunk card slot stuck, when the trunk card slot there is a foreign body, naturally can not be closed, the solution: need to clean the card slot.
9, there are sealing strips on the trunk cover of the car, the sealing strip plays a waterproof role, if there is a problem with the sealing strip, it will lead to the trunk cover can not be closed, the solution: replace the sealing strip in time.
What is the reason for the big gap in the trunk
1, improper installation of the seal strip, resulting in a seal gap is too large, solution: because the seal strip is rubber, long-term use of rubber will age and harden, resulting in a larger gap, the owner can go to the 4s shop to replace the new trunk seal.
2, the trunk hinge mounting screw fixing bracket is misplaced, or the screw is loose, resulting in the trunk lid, there is a lead to the gap is too large, the solution: you can adjust the position of the hinge and the position of the fixed bracket, re-tighten the screw, and then adjust the rubber sealing ring to look at.
3, long-term loading of heavy objects in the trunk, heavy objects cause deformation of the trunk, resulting in a larger gap in the trunk, the solution: go to the maintenance station for trunk maintenance, and try to avoid long-term loading of heavy objects.
4, the back door of the strut deformation, eventually leading to the back door and the side of the relative position of the change, the trunk gap becomes larger, the solution: replace the deformation of the back door strut.
5, caused by the assembly problem, unreasonable assembly leads to a large gap in the trunk of the car, generally does not affect the normal use of the vehicle, the solution: you can drive to the 4s shop to adjust the gap.
6, the trunk lock mechanism is loose, the lock mechanism is loose, the trunk function is affected, resulting in a large gap in the trunk of the car, the solution: overhaul the trunk lock mechanism.
7, the trunk folding failure, the trunk can not be used normally, the trunk gap is large, the solution: repair the faulty trunk folding.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
