Car rear wheel eyebrow depression how to repair.
There are many ways to repair the rear wheel eyebrow depression, and the appropriate repair method can be selected according to the degree of depression and specific conditions. Here are some common fixes:
Use the boiling water softening method: First, you can boil a pot of boiling water to soften the sunken part, and then push it out by hand. This method is suitable for smaller depressions.
Buy dent repair kit: You can buy dent repair kit online, the price is not expensive, only need tens of dollars. Before use, first clean the dented part, then put the special glue into the glue gun, and preheat for about 7 minutes. Then, select the appropriate gasket, use the glue gun to evenly coat the gasket with sol, and quickly stick in the depressed position, gently press and hold until the special glue is fixed. Finally, align the hole in the middle of the traction bridge with the fixing gasket, put the nut into the gasket screw and tighten it, then tighten the nut until the nut is pulled into the depression and levelled.
Non-destructive repair method: The tools required for this method are not complex, simple to carry, generally only a complete set of depression repair toolbox (crowbar, hot melt gun, hot melt glue, meson pull ring, leveling pen, rubber hammer, etc.). The crowbar is mainly used to push the dented steel plate from the inside out, control the force, and fine-tune it bit by bit. Then use a rubber mallet to knock it out from the outside in to repair the overall shape. Finally, use a pencil-like leveling pen to fine-tune the convex marks of the body, and under the irradiation of the leveling light, all angles look the same as the original paint.
Sheet metal painting process: If the depression is large or complex, it can be repaired through the sheet metal painting process. It is recommended to go to a professional car repair shop for treatment.
The above methods have their own characteristics, and the selection should consider the size and location of the depression, as well as personal requirements for repair effect and time.
Car wheel eyebrow rust is one of the common problems of the owner, the following introduces several effective treatment methods:
1. Treatment of slight scratches: If the wheel eyebrow of the car is only slightly scratched, and the primer is not lost, you can use fine wax or coarse wax to repair. First wipe the scratches clean, and then wipe the mixture in a straight line, and then wipe the coarse wax and fine wax from inside to outside in the same direction, you can repair small scratches.
2. Scratches with a larger area: If the scratch area of the wheel eyebrow of the car is slightly larger, but the primer is not damaged, you can use the paint pen for first aid. Shake the paint brush well before use, then apply to the scratch and let dry.
3. Serious scratching treatment method: If the scratch of the wheel eyebrow of the car has seen the primer, or has rusted, it is necessary to use the scar removal and rust prevention agent for treatment. Spray the stain remover and anti-rust agent on the scratch, wait for a moment and wipe it clean with a clean cloth. Then repaint with self-spray paint as needed.
It should be noted that different models of car wheel eyebrow materials are different, some models of wheel eyebrow is engineering plastic, will not rust, so it needs to be treated according to the actual situation. At the same time, when repairing the wheel eyebrow of the car, it is necessary to pay attention to safety and avoid using too violent or dangerous ways.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
