Radiator.
Product introduction
The coolant flows inside the radiator core, and the air passes outside the radiator core. The hot coolant cools because it dissipates heat to the air, and the cold air heats up because it absorbs the heat emitted by the coolant, so the radiator is a heat exchanger.
Installation method
The radiator is divided into three installation methods, such as the same side in, the same side out, the different side in, the different side out, the lower into the lower out, no matter which method, we should minimize the number of pipe fittings, the more pipe fittings, not only the cost increases, the hidden danger will increase.
sort
There are two main types of car radiators: aluminum and copper, the former for general passenger cars, the latter for large commercial vehicles.
breakdown
The hose of the engine radiator will be aging for a long time to use, easy to break, water is easy to enter the radiator, the hose is broken in the process of driving, the high temperature water splashing out will form a large group of water vapor from under the engine cover, when this phenomenon occurs, you should immediately choose a safe place to stop, and then take emergency measures to solve.
Under normal circumstances, when the radiator is flooded, the joint of the hose is most likely to have a crack and water leakage, then you can use scissors to cut off the damaged part, and then the hose is re-inserted into the radiator inlet joint, and the clamp or wire clamp. If the leak is in the middle of the hose, wrap the leak with tape. Clean the hose before wrapping. After the leak is dry, wrap the tape around the leak of the hose. If you do not have tape on hand, you can also wrap plastic paper around the tear first, and then cut the old cloth into strips and wrap it around the hose. Sometimes the hose crack is large, and it may still leak after entanglement, then the tank cover can be opened to reduce the pressure in the waterway and reduce leakage.
After taking the above measures, the engine speed can not be too fast, to try to hang high-grade driving, driving also pay attention to the pointer position of the water temperature meter, found that the water temperature is too high to stop cooling or add cooling water.
What is the solution to the water leakage of the car tank?
Don't panic when your car's water tank is leaking, here are some practical solutions to help you cope in time:
1. The water pipe is broken
If it is found that there is a small crack in the water pipe (1 mm or 2 mm), there is no need to fight, just add a bottle of specially designed water tank strong plugging agent to the water tank. Start the engine and let it run, and the plugging agent will automatically take effect.
2. Oil emulsification leads to water leakage
If the engine oil emulsification affects the water tank leakage, in-depth inspection is needed. At this point, it may be necessary to disassemble the engine and replace the damaged cylinder pad to ensure that the waterway is clean and sealed.
3. Water tank cover is negligent
Check that the tank cover is tightly fastened. If it is found to be loose, be sure to tighten it again to ensure that the internal pressure of the tank is normal.
4. The rubber pipe joint is leaking
When the rubber pipe joint leaks, use a screwdriver to assist. Gently unscrew the joint, wrap two coils of wire as a temporary fix, ensure that the joint is firm, and then tighten with pliers.
5. The heat dissipation pipe is broken
If the leak originates from the heat pipe, the same plugging agent can be used. After pouring the caulk, start the vehicle and cut the leak. Soapy cotton can be effectively blocked, and then use pliers to flatten the severed head and roll the edge to achieve a sealing effect.
Remember, every time you deal with a water leak, be safe and seek professional help if necessary to prevent the problem from worsening. Taking preventive measures is the key to avoiding water tank leakage.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
