Car air conditioning filter how to change.
The replacement steps of automobile air conditioning filter are roughly as follows:
Open the passenger door, then open the glove box; Carefully pry the trim off the side of the glove box.
Unscrew the four screws on the glove box and set them aside, be careful not to lose them.
Stand with your feet against the removed glove box because of the wire at the back of the glove box that connects the glove box small light.
Open the buttons on both sides of the air conditioner filter cover and pull out the air conditioner filter; If the air conditioning filter is not very dirty, you can gently beat the debris and dust in the gap, if it is very dirty, it should be replaced with a new filter.
In addition, the video tutorial of replacing the air conditioning filter is also a good way to learn the replacement process, and you can more intuitively understand the replacement steps and precautions. The replacement cycle of the air conditioning filter is generally 10,000 kilometers once, but the specific frequency needs to be determined according to the use of the vehicle, if often used in harsh environments, it may be necessary to shorten the replacement cycle.
When replacing the air conditioning filter element, it should be noted that the filter element cannot be cleaned with water, nor can it be blown with high pressure gas to avoid damaging the filter element. At the same time, when installing the new filter element, pay attention to the direction to ensure that the arrow direction is consistent with the direction of the air flow to avoid affecting the filtration effect.
Does the car air conditioning filter have positive and negative elements
exist
Automotive air conditioning filter element does exist positive and negative points. This information is usually clearly indicated by the direction of the arrow on the filter, which represents the direction of the air flow, that is, the direction we should be pointing when installing the filter. When the arrow faces up, it means that the side is positive, and the installation should ensure that the front is facing the air flow. In addition, if there is no arrow as an indication, we can also judge by observing the appearance of the filter element. In general, the front side of the filter element is an ordinary wool surface, while the back side shows a support line structure. In the process of installing the air conditioning filter element, in order to ensure that its fine dust filtration effect is optimal, we must ensure that the arrow on the filter element is facing down.
The front side of the air conditioning filter element is usually rough and faces the direction of the air flow, while the reverse side may have a support line structure. In addition, if the filter contains activated carbon, the black side should face the direction of the air flow, while the white side is the opposite. In actual operation, the front and back sides of the air filter are usually more intuitive, and once installed, it is difficult to install smoothly. For the car air conditioning filter, the arrow or digital mark provides clear guidance, as long as the arrow is facing up and the digital side is facing the front, it can be correctly installed.
The function of the air conditioning filter element is to filter the air entering the interior of the carriage from the outside world to improve the cleanliness of the air. General filter substances include impurities contained in the air, small particles, pollen, bacteria, industrial waste gas and dust. The replacement cycle of the air conditioning filter is usually replaced every 1 year or every 20,000 kilometers, if the car is often driven in the dusty section, then the air conditioning filter is more likely to be dirty, and the replacement cycle should be shortened.
Can the car air conditioning filter be cleaned with water
Better not
Car air conditioning filter is best not to clean with water. Even if the surface of the filter looks clean, water droplets can still breed bacteria and cause the air conditioning filter to smell. In addition, washing may damage the filter element and affect its filtration effect. If you do need to clean, it is recommended to find a professional maintenance organization or 4S shop for cleaning.
For the maintenance of the filter element, the use of compressed air gently blowing can remove the surface dust, is a feasible cleaning method. In extreme cases, if the filter element is heavily clogged, a new filter element may need to be replaced.
In general, the cleaning and maintenance of automotive air conditioning filters should follow professional recommendations and avoid using methods that may damage the filter to ensure the normal operation of the air conditioning system and the air quality inside the car.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
