How to change the shock absorbing top glue
The replacement method of the damage of the top glue of the shock absorber, first of all, stop the car on the flat ground before replacement, prepare the new top glue, jack and soapy water, and can also be replaced with dilute water of dishwashing liquid; Then, using a jack to lift the part of the body that needs to be replaced, the spring is stretched and replaced more easily.
It is enough to lift the body of the car so that the spring of the shock absorber is fully visible without lifting it too high; Finally, spray soapy water to clean the spring, and spray some soapy water to lubricate the new top glue. After installation, wash the soapy water thoroughly to prevent the spring of the auto safety part shock absorber from rusting.
The rubber rupture at the top of the shock absorber is usually caused by aging. It basically needs to be replaced every 40,000km. For replacement, remove the shock absorber and replace it directly.
The role of damping rubber is pressure rubber, commonly known as the damping frame bearing with a spring seat ring. Its material plastic rubber mainly plays a cushioning role, that is to say, when the pressure top Angle through some speed bumps, the body will have a slight sense of lift after the tire is completely landed, and the comfort is special. On the other hand, the shock absorber rubber also has the effect of sound insulation, but also can reduce the tire and the ground generated tire pressure, can reduce the tire is bumpy ground when the direct impact on the car
2 Shock absorbing top glue is changed once a few years
The top rubber of the shock absorber should be replaced every 80,000 km or it can be replaced with the shock absorber. Auto shock absorber top rubber is used to cushion the shock absorber spring and body impact. When driving on uneven roads, each top adhesive bears more than a quarter of the weight of the body.
The role of auto shock absorber top glue:
1. Its material is plastic rubber, with the function of cushioning and shock absorption;
2. When the pressure is completely top Angle through some speed bumps, the body will be lifted after the tire completely lands on the ground, feeling slightly upward, and the comfort is particularly good;
3. It soundproofes. It also relieves tire and ground pressure. When the tire is hit, it reduces the direct impact on the car.
Symptoms of rubber cracking at the top of the shock absorber:
Poor comfort, bumps over humps and speed bumps. The thunk sound was very distinct, as if there was something wrong with the shock absorption.
- 2. Tire pressure increases and rumble can be seriously heard.
3. The direction becomes tilted, which means that when you are driving in a straight line, the steering wheel is tilted, and if you are driving in a straight line, you will not go in a straight line.
4. You make a squeaky sound when you hit the direction in the right place. Severe steering wheels can feel it. The sound obviously carries on.
5. This is also a cause of bias.
6. Serious damage will affect the service life of shock absorber.
