Left front door glass outer strip replacement method?
First of all, we need to get the tools we need to remove the entire window trim, a small screwdriver, a large screwdriver, a t-20 spline, and then we'll start!
Open the car door, on the side of the door, we will find a small black cover, the small black cover plays a decorative role, need to be removed, will find inside fixed window outside the screw, take out the small screwdriver, with a small screwdriver to pry down the small black cover, pay attention to the pry must be light, do not scratch the door paint, Put away the little black lid that came off.
After the little black cover is removed, we will find inside the screw that holds the outside of the window, take out the t-20 spline, and use the t-20 spline to remove the screw, the removed screw should be put away for installation, and this kind of screw is very difficult to buy, please note this.
The removal of the window trim. Take out the big word screwdriver, use the big word screwdriver from the window outside the edge of the bar gently pry, let the window outside the bar loose, so that we are good to disassembly, this step is relatively high technical requirements, mainly do not put the door paint scratch, affect the appearance, we do this step, must be light, careful oh.
Next, we use our fingers to hold the outside of the window bar, and then gently break up, slowly the outside of the window bar and the edge of the door separated, pay attention to be sure to slowly, bit by bit to break up, too much force, it is easy to deform the outside of the window bar, so that the whole outside the window bar can not be used, this point we need to pay attention to.
When the window strip is about to be taken down, it must be lighter and slower to avoid damaging the door finish or sealing strip, which requires you to be careful and patient. If you have done these two things, I believe it can be removed smoothly.
Finally, the disassembled window strip must be placed in a soft place, on the back seat of the car can also be, so as to protect the bright side of the window strip from being scratched, the details should be done, but also for the beauty of our vehicles. For those of you with this problem, try it yourself!
