• head_banner
  • head_banner

SAIC MG 6 Auto Parts accelerator pedal sipplier 10159830

Short Description:


Product Detail

Product Tags

Products information

Products name ACCELERATOR PEDAL SIPPLIER 
Products application SAIC MG 6
Products OEM NO 10159830
Org of place MADE IN CHINA
Brand CSSOT /RMOEM/ORG/COPY
Lead time Stock,if less 20 PCS,normal one month
Payment TT Deposit
Company Brand CSSOT
Application system chassis

Products knowledge

There is a slight vibration on the gas pedal
The earliest car accelerator pedal models are pulled wire, and now they are basically Hall sensors, so there is no motor or rotating parts on the accelerator pedal itself, so the slight vibration of the accelerator pedal is generally due to excessive engine shake or body resonance, resulting in transmission to the accelerator pedal above, the possible reasons for failure are as follows:
The first kind, the engine ignition coil or spark plug due to a long time has not replaced the internal insulation parts aging, resulting in secondary fire jumping or poor performance, resulting in the engine can not work smoothly, shake transmitted to the accelerator pedal. The solution is to replace the damaged ignition coil or a replacement set of spark plugs.
Second, the vehicle engine due to the filling of fuel is not good or the vehicle in the urban stop-and-go for a long time, did not pull the high-speed. This situation will make the engine internal carbon accumulation too much, the vehicle nozzle into the cylinder of fuel is absorbed by carbon deposition. The engine is not in the best working condition, and the vibration is transmitted to the gas pedal.
Third, the engine or transmission machine mat aging damage, can not reach the function of shock buffering, engine vibration will be transmitted to the steering wheel in the cockpit through the body, shake transmission of the accelerator pedal. The solution is to replace the damaged engine or gearbox floor MATS.
Fourth, the engine throttle is too dirty, so that the air inside the engine is not evenly into the cylinder combustion, resulting in engine jitter, this jitter will also be transferred to the steering wheel, so the jitter transfer to the accelerator pedal.
Fifth, the tire dynamic balance is not good, leading to the body resonance in the process of driving, the resonance is transmitted to the body, leading to the accelerator pedal vibration, at this time we need to go to the maintenance mechanism, do four-wheel dynamic balance.

OUR EXHIBITION

展会3
展会2
展会1

Good Feetback

6f6013a54bc1f24d01da4651c79cc86
46f67bbd3c438d9dcb1df8f5c5b5b5b
95c77edaa4a52476586c27e842584cb
78954a5a83d04d1eb5bcdd8fe0eff3c

Products catalog

荣威名爵大通全家福

Related products

mg6-18全车图片shuiy

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products