How often should the oil filter be changed？
The replacement cycle of the oil filter depends on a variety of factors, including the type of oil, driving conditions, and the use environment. In general, the replacement cycle of the oil filter is recommended as follows:
For vehicles using fully synthetic oil, the replacement cycle of the oil filter can be 1 year or every 10,000 kilometers driven.
For vehicles using semi-synthetic oil, it is recommended to replace the oil filter every 7 to 8 months or every 5000 kilometers.
For vehicles using mineral oil, the oil filter should be replaced after 6 months or 5,000 kilometers.
In addition, if the vehicle is driven in a harsh environment, such as often driving on dusty, high temperature or rugged roads, it is recommended to shorten the replacement cycle to ensure the normal operation of the engine and extend the service life. Not replacing the oil filter for a long time may lead to blockage, so that impurities in the oil directly into the engine, accelerating engine wear. Therefore, regular replacement of the oil filter is the key to maintaining the healthy operation of the engine.
Oil filter replacement tutorial
The process of replacing an oil filter involves several key steps to ensure proper operation to protect the engine and extend its life:
Prepare tools and materials: including suitable wrenches, filter wrenches, new oil filters, seals (if required), new oil, etc.
Drain the used oil: Locate the drain screw on the oil pan and open the oil to allow the used oil to flow into the prepared container.
Remove the old oil filter: Use the filter wrench to loosen and remove the old oil filter in a counterclockwise direction.
Install the new oil filter: Put the sealing ring on the oil outlet of the new oil filter (if necessary), and then install the new filter back to the original position, tighten it by hand and screw on 3 to 4 turns with a wrench.
Add new oil: Open the oil filler port, use a funnel or other container to avoid oil spillage, and add the correct type and amount of new oil.
Check the oil level: After adding the new oil, check whether the oil level is within the appropriate range.
Clean and dispose of the used oil and filter: Put the used oil and the used oil filter into the appropriate waste container to avoid environmental pollution.
Pay attention to safe operation, especially when replacing the oil filter in the hot condition, the exhaust pipe and oil pan may be very hot, and need to be handled carefully. In addition, make sure that the oil and filter used match the recommendations of the vehicle manufacturer to maintain the best performance and protection of the engine.
What does the oil filter do?
The main function of the oil filter is to remove impurities and sediments in the oil and keep the oil clean. It is usually installed in the lubrication system of the engine, and works with the oil pump, oil pan and other components.
The main functions of the oil filter are as follows:
Filter: The oil filter can effectively filter impurities in the oil, such as metal particles, dust, carbon precipitates, etc., to prevent these impurities from entering the engine and avoid causing wear or damage to the engine.
Improve the quality of lubricating oil: the oil filtered by the oil filter is more pure, which can improve its lubrication performance, thereby extending the service life of the engine.
Reduce fuel consumption: Because the oil filter can effectively prevent impurities from entering the engine, it can reduce the wear inside the engine, thereby reducing fuel consumption.
Protect the environment: By removing impurities in the oil, these substances can be prevented from being discharged into the atmosphere to pollute the environment.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
