The role of automobile condenser.
The role of automobile condenser is mainly reflected in the automobile air conditioning system, and its role is as follows:
Cooling and cooling: The condenser dissipates the high temperature and high pressure refrigerant vapor discharged from the compressor to cool it down and condense it into liquid high pressure refrigerant.
Heat exchange: The condenser is a heat exchanger, which distributes the heat absorbed by the refrigerant in the car to the atmosphere through the condenser.
State transition: The condenser can convert gas or steam into a liquid, which is achieved by rapid heat transfer to the air near the tube.
In addition, the car condenser is usually installed on the front of the car (in front of the radiator), and is cooled by a fan, ensuring that the air conditioning system runs efficiently. It should be noted that the pressure of the condenser is higher than that of the coolant radiator of the engine, so special care is required when installing and servicing.
How to clean the car condenser
The steps to clean the car condenser are as follows:
Start the car and turn on the air conditioning, let the electronic fan start to work, and then rinse the condenser with water to ensure that the water can cover every part of the condenser.
After the special detergent is mixed with water, the water spraying tool is used to evenly spray on the surface of the condenser, while the electronic fan should continue to operate to help the detergent distribute to all corners of the condenser.
Turn off the air conditioner and engine, observe the surface of the condenser, after the dirt and dirt float, rinse repeatedly with plenty of water until the surface of the condenser is clean.
As to whether the condenser can be cleaned with a high-pressure water gun, it is recommended to adjust the pressure to the appropriate level when using the high-pressure water gun, and avoid excessive force to avoid damaging the condenser.
Cleaning the car condenser is necessary, because long-term use will lead to the accumulation of dust, catkins and other debris on the surface of the condenser, affecting the heat dissipation effect, and then affecting the normal operation of the air conditioning system. Regular cleaning can maintain the best performance of the condenser and improve the efficiency of the air conditioning system.
The difference between a car condenser and a water tank
The main difference between automotive condensers and water tanks is that they have different connection pipes, devices worn, thicknesses and functions.
The connection pipes are different: the car condenser is connected to the aluminum pipe, while the car water tank is connected to the rubber tube. This means that the condenser uses metal tubing, which is usually connected to the air conditioning compressor and liquid storage tank, while the water tank uses rubber tubing, which is connected to the engine water pump and engine thermostat.
The device is different: the car's condenser has an aluminum cylinder drying tank next to it, while the car's water tank has a water temperature sensor under it.
The thickness is different: the thickness of the car condenser is about 1.5 cm, and the thickness of the car water tank is about 3 cm.
Different functions: the condenser is a part of the air conditioning system, which is the refrigerant, mainly responsible for heat dissipation in the vehicle air conditioning system; The water tank is part of the engine cooling system, which is the coolant, mainly responsible for reducing the working temperature of the engine.
These differences make the condenser and the water tank play different roles in the car, although they are located in the front part and close together, but each performs an important function.
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
