The installation method of the headlight cover of the car is as follows:
1. Unplug the power socket of the light bulb: First, the vehicle should be turned off for more than 5 minutes, unplug the car key, wait for the engine to cool down completely, and then open the engine compartment cover to prevent the parts from scalding themselves;
2. After opening the engine compartment cover, you can see the dust cover behind the headlight assembly. The dust cover is mostly made of rubber and can be directly unscrewed along the direction of the screw (some models can be directly pulled off), not It takes too much effort, then you can see the bulb base in the headlight assembly, pinch the wire cir clip next to the base, and take out the bulb after the clip is released;
3. After unplugging the power port, remove the waterproof cover behind the bulb;
4. Take the bulb out of the reflector. The light bulb is generally fixed by a steel wire cir clip, and the light bulb of some models also has a plastic base;
5. Put the new light bulb into the reflector, align it with the fixed position of the light bulb, pinch the wire cir clips on both sides and push it inward to fix the new light bulb in the reflector;
6. Re-cover the waterproof cover, plug in the power supply of the bulb, and the replacement operation is completed.
