What is the car trunk interior panel cover
The trunk interior trim plate cover is a small part used to close and protect the interior structure of the suitcase. It is usually installed at some openings or joints of the suitcase to prevent dust, moisture and other external factors from entering the car, and plays a beautiful and fixed role.
Classification and material of cover
Plug cover is mainly divided into hot melt plug cover and ordinary plug cover. The body of the hot melt plug cover is generally nylon, and the circumference is designed with EVA hot melt adhesive. The plug cover is inserted into the sheet metal hole before baking. After baking, the hot melt adhesive will paste the plug cover and sheet metal together. Ordinary plug covers are installed in the assembly workshop and are glued to through interference fit with the sheet metal holes.
Material characteristics of the cover
Cover plugging materials include EPDM, TPE, etc. EPDM has good ozone resistance, heat resistance, aging resistance and elasticity, suitable for long-term use in the environment of 120℃, the highest heat resistance temperature of 150℃. TPE material, because of its properties between plastic and rubber, has a variety of varieties, suitable for different application scenarios .
The function of blocking the cap
dustproof and waterproof : The cover can effectively prevent dust and moisture from entering the interior of the suitcase and protect the interior environment.
Noise reduction and corrosion prevention : Good sealing performance can reduce noise and vibration, while preventing corrosive substances from damaging the interior parts.
beautiful fixed : the design and installation of the cover can make the interior structure of the suitcase more neat and beautiful, and play a fixed role to ensure the normal work of each component .
The main function of the car trunk interior trim plate cover is to protect the cylinder head screws inside . Since some models of the engine do not have a valve chamber cover, in order to reduce the damage of the cylinder head screws, it is necessary to use a plug cover for protection .
In addition, the plug cover can prevent dust and impurities from entering the engine interior and keep the engine interior clean .
Care and maintenance advice
Regular inspection : Regularly check the tightness of the plug cap to ensure that it is not loose or falling off.
cleaning and maintenance : keep the engine room clean, avoid dust accumulation on the plug cover, affect its protection effect.
replacement cycle : According to the recommendations of the vehicle maintenance manual, replace the aging plug cap regularly to ensure its normal operation.
Through the above measures, the service life of the car trunk interior trim panel cover can be effectively extended to ensure that it plays a normal protective role.
car trunk interior trim panel cover is usually used to secure certain parts or cover the internal structure that does not need to be exposed. They are connected by bolts or screws to provide a fixed and protective function. To remove it, locate the plug cover, use a tool to remove the plug cover, remove the bolts or screws, and pull down the buckle .
Disassembly procedure
Locate the plug cover : First, you need to determine the specific location of the plug cover. Usually, the plug cover will cover the bolt or screw to protect these fasteners.
Use a tool to remove the plug cover : Carefully remove the plug cover using a suitable tool, such as a screwdriver or special clip pry bar. Be careful to keep the force gentle but firm, so as not to damage the body.
Remove the bolt or screw : Once the plug cover is removed, the bolt or screw can be seen. Use the appropriate tool (such as a wrench or screwdriver) to remove it.
Remove interior panel : Finally, pull down the latch to remove the interior panel. Note that the design of each car may be different, some cars may have interior panels designed in pieces and need to be removed from the outermost trim panel .
Remove tools and precautions
Tools : screwdriver, clip lever, wrench, etc.
precautions : Maintain a gentle but firm force during disassembly to avoid damage to the body. The design of each vehicle may be different, and the disassembly method may be adjusted according to the specific situation .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
