What is a car water bottle hose
The automotive water bottle hose , commonly known as the glass sprinkler hose or the wiper sprinkler hose, is a key component in the automotive glass sprinkler system. Its main function is to transfer the glass cleaning liquid from the storage to the nozzle, and then the nozzle is sprayed to clean the glass .
Material and characteristics
Automotive water bottle hoses are usually made of high-pressure, corrosion-resistant materials to ensure that there will be no aging or rupture problems during long-term use. The material can withstand a certain amount of pressure, works well even when the vehicle is traveling at high speeds, and is resistant to the chemicals in the cleaning fluid .
Installation and maintenance
When installing the glass water spray hose, ensure that it is firmly connected and does not loosen or leak. At the same time, pay attention to the direction of the hose to avoid being squeezed or rubbed during driving. Regularly check the appearance of the hose, such as aging, cracking and other phenomena should be replaced in time, and choose the product that matches the model of the original car .
Replacement procedure
The steps to replace the hose of the car water bottle are as follows:
Open the hood of the car and remove the front bumper to reveal the glass water storage tank.
Remove the old glass water spray pipe, taking care to start unbundling the wiring harness along the spray pipe.
Install the new spray pipe and ensure that the wiring harness is properly connected to the interface.
Re-fix the connected new spray pipe, and turn on the wiper spray function to verify whether it works normally .
The main function of the car spray bottle hose is to transmit the glass cleaning fluid to ensure that the cleaning fluid can be delivered to the nozzle in time when needed, so as to clean the front windshield of the vehicle .
Specific functions and characteristics
transmission function : The hose is responsible for transferring the glass cleaning liquid from the storage to the nozzle, and then the nozzle ejects the glass .
pressure resistance : the hose needs to withstand a certain pressure to ensure that it can still work normally when the vehicle is running at high speed .
corrosion resistance : as chemicals may be contained in the cleaning solution, the hose should have good corrosion resistance to avoid damage .
Material and installation maintenance
material : usually made of high pressure and corrosion resistant materials to ensure that there is no aging, cracking and other problems in the long-term use .
Installation and maintenance : During installation, ensure that the connection is firmly connected without loosening or leakage. Regularly check the appearance of the hose, such as aging, cracking and other phenomena should be replaced in time, and choose the product that matches the model of the original car .
When the car water bottle fails, the following repair methods can be taken according to the specific problem:
Check the leak location and repair
pot body cracks : If the water can bottle body cracks, you can use strong glue to repair. Before repairing, ensure that the cracks are clean and dry to enhance the adhesion of the glue.
Water leakage at the interface : check whether the water pipe connector is loose or the sealing washer is aged. If loose, try to tighten the interface first; If water still leaks, replace the gasket with a new one.
Water leakage in the sprinkler motor seal : If the seal of the sprinkler motor fails, remove the motor and replace the seal.
Clean clogged spray nozzle
If the water bottle does not spray water, the nozzle may be blocked. You can use a fine needle or toothpick to gently dredge the blowhole, taking care to moderate the force to avoid damaging the nozzle.
For stubborn clogs, the nozzle can be disassembled and soaked in warm water to soften the dirt before cleaning.
Test for tightness
Injection observation method : After repair, fill the spray bottle with water and let it stand for a period of time to watch for signs of leakage.
pressure test method : Use the pump to apply pressure to the pot to check whether there is bubble or water seepage, to simulate the actual use situation.
Running test method : Install the spray bottle on the car, actually operate the spray function, observe whether water leakage.
Replace the damaged parts
If the water bottle is seriously damaged (such as a large area of rupture or repeated repair is ineffective), it is recommended to directly replace the new water bottle to ensure driving safety and normal use.
Regular maintenance
Regularly check for adequate glass water, and clean blowholes and lines to avoid clogging.
When used in winter, ensure that the glass water will not freeze, so as not to damage the sprinkler system.
Through the above methods, the common faults of the car water bottle can be effectively solved, the service life can be extended and the driving safety can be guaranteed.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
