Car rear side window trim matte effect
The main role of the matte treatment of the rear side window trim panel of the automobile includes the following aspects :
Improved privacy : The matte finish of the rear side window panel effectively blocks the outside view and protects the privacy of the vehicle occupants. This treatment makes the Windows appear darker, thus reducing the outside world to peek inside .
Reduce direct sunlight : Matte finishes reflect and scatter light, reducing direct sunlight entering the car and providing a more comfortable interior environment. This helps to lower the temperature inside the car and reduce UV damage to the contents of the car .
Enhance beauty and texture : Matte finish can give the rear side window panel of the car a unique texture and visual effect, making it look more upscale and textured. This treatment is often used on high-end models to enhance the overall appearance .
Easy maintenance : the matte treatment of the rear side window panel is relatively easy to clean and maintain, not easy to stain fingerprints and stains, and maintain a good appearance for a long time .
Automobile rear side window trim matte treatment can be achieved by coating or spraying matte paint. Laminating is a more common practice that can achieve a matte effect without changing the quality of the original veneer, and is relatively easy to replace. When applying the film, it is necessary to pay attention to select good quality products and operate correctly according to the instructions to avoid bubbles or uneven .
Another method is to spray matte paint. This method requires a higher level of construction skills, but can achieve more lasting and even results. Before spraying, it is necessary to ensure that the surface of the decorative plate is clean and dust-free, and pay attention to uniform spraying during the spraying process to avoid the phenomenon of hanging or orange peel .
In addition, some auto parts stores offer retrofit services that can retrofit the rear window trim panel into a sporty style shutter or spoiler, and these retrofits often provide a matte finish as well. For example, Golf 6/7 blind rear window retrofit Sports tuyere spoiler and GTI/R blinds are common retrofit options .
When the rear window (or rear windshield) of the vehicle is damaged, it is particularly important to master its replacement method. The following will explain the whole process to help you cope with it.
1. Preliminary preparation
Before starting, it is necessary to ensure the safety of the environment inside the car, remove the luggage compartment cover, the rear column decoration and the rear window panel to facilitate the operation. At the same time, disconnect the window antenna connector A and the rear window demister connector B to prevent interference. If the old window needs to be replaced, it is recommended to use an oil marker to mark the corresponding position of the old and new window and the body, so as to facilitate accurate subsequent reset.
Second, remove the old window
Next, release the retaining clasp and carefully pull down the back of canopy liner A to prevent damage. Use protective tape and awl to punch holes on the edge of the window to facilitate installation of wire to control the cutting process. Remove the lower rubber seal A and cut with a multi-purpose tool if necessary. With the help of the assistant, cut the adhesive around the rear window through the fret saw, making sure not to hurt the body. Then, carefully remove the old Windows and thoroughly clean the remaining adhesives and fasteners.
Three, new window installation steps
First, the adhesive surface of the body should be thoroughly cleaned to ensure that there is no grease and moisture residue. If you are reinstalling old Windows, you need to clean and prepare new adhesives. Apply a base coat to the edge of the rear window, then install a rubber seal and cut off any excess. Use tape to secure the upper rubber seal, the side rubber seal, and all clasps and fasteners. Accurately position and secure the rear window in the window frame to ensure that the adhesive is evenly applied and precisely positioned. Reapply the glass base coat to the primed area, taking care to select the correct sponge type. Next, the body primer is applied and allowed to dry in order to provide a good adhesion base for the new adhesive. Apply the adhesive evenly to the edge of the rear window with a sealing gun, then secure it with a suction cup and ensure alignment. Remove extruded excess adhesive and carefully inspect to repair any possible leaks, allowing the Windows to dry naturally and form a seal. Finally, all remaining parts are installed to complete the entire replacement process. To ensure that the adhesive can cure completely, it is recommended to let the vehicle sit for at least 4 hours.
By following these steps, you will be able to replace the rear Windows yourself, thereby improving the safety and comfort of your vehicle. Although the entire repair process requires care and patience, the end result will be the best reward for your efforts.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
