Car handle small cover how to install
The installation steps of the small cover of the external handle are as follows: :
Unlock center control button : Ensure that the car is unlocked, and then unlock the center control button.
Remove the screw cover : Use a flat-head screwdriver to pry away the screw cover behind the handle. Gently pull the handle with your left hand, pry the screw cover with your right hand using a flat-head screwdriver, and remove the screw counterclockwise.
Remove the handle shell : Continue to remove the handle shell and the screws inside it using a flat-head screwdriver.
Removing the door trim panel : pry up the door panel using a flat-head screwdriver and then a Phillips screwdriver to create gaps, and pry up the clips of the door trim panel one by one. Insert the screwdriver into the gap between the door frame and the clip, and gently pry down the door trim plate, taking care not to exert too much force to avoid damaging the horn line.
Install the small cover for the external handle : Place the small cover at the position under the handle and tighten the screws using a Phillips screwdriver to ensure that the cover is tightly attached to the door.
Precautions :
Be gentle and careful during operation to avoid damaging vehicle parts.
Make sure all parts are in the right place and press firmly until the cover is tightly in place with the door.
During disassembly and installation, be careful not to exert too much force to avoid damaging the horn line or other components.
The main reasons why the external handle of the car cannot be opened include the following :
lock body failure : The door lock body may be faulty, such as wear, rust or damage, resulting in the external handle cannot be opened.
Cable pulling problem : The cable pulling between the door handle and the lock body may be broken, loose, or worn, affecting the operation of the external handle.
door stuck : There may be foreign objects stuck inside the door, such as items caught in the window or debris in the door panel, resulting in the external handle cannot be opened.
electronic control system failure : the door opening of some vehicles is controlled by the electronic control system, and the system failure may cause the external handle to be unable to operate.
Safety lock function : When the safety lock function of some models is activated, the external handle cannot be opened, and it needs to be unlocked by the switch in the car.
Child lock open : The child lock may be accidentally opened, resulting in the external handle cannot be opened from the outside.
Lock block cable failure : The lock block cable failure may cause the door to fail to open from the outside.
door structure problem : door hinge and lock column deformation or damage, especially in cold winter due to freezing caused by the lock block can not operate.
Solutions include :
Check the child lock : Make sure the child lock is closed and adjust it using a word screwdriver if necessary.
lubricate the lock body : Check and lubricate the lock body to reduce the possibility of wear and jamming.
Replace the mechanical parts inside the lock : If the lock body or cable is damaged, you may need to replace the mechanical parts.
manual unlock : Some models can be unlocked by manual unlock mechanism, usually near the door lock mechanism there is a black or red cover and a metal rod, press the cover and pull the metal rod to unlock.
Seek professional help : If the above methods do not work, it is recommended to seek professional help and use professional tools and techniques to resolve the problem.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.