How to remove the external handle?
Removing door panels is easy for many people. Special care should be taken when prying open the decorative cover of the outer handle, so as not to damage the paint, you can use a cloth block as protection, and carefully use a small pry bar to operate. Removing the outside handle may be time-consuming, especially when the first attempt may not be very successful, if forcibly removed, the whole after careful study, can find the skills.
Before removing the door, ensure that the unlocking button is on to prevent the door from locking. On the handle on the inside of the door, you can find a small round hole, which is the cover of the screw. Use a flat-head screwdriver to remove the screw cap, then use a Phillips screwdriver to loosen the screws inside.
Before removing the door handle, prepare the necessary tools, including a small flat-head screwdriver and a t-20 spline. The next step is to remove the decorative cover of the door handle lock block.
Prepare a small flat-head screwdriver and a t-20 Phillips screwdriver. Under the decorative cover of the door handle, you will find a small square hole. Insert a small flat-head screwdriver into the small square hole and gently pry it to remove the decorative cover of the lock core on the outside handle.
In addition, you will need a small hook and a small thin piece of wire that can be made by simply bending it with pliers. Open the door and on the edge of the door you will see a black plastic decorative cover that covers the screw hole and you can gently remove it by hand.
Car handle principle:
The principle of car handle is based on the principle of force. When passengers need to enter or leave the car, they can use the car handle for support and stability. The handle is usually installed on the door of the car.
The main function of the handle is to provide a stable support point so that passengers can easily enter or leave the car. When a passenger grabs the handle, they apply an upward force that is transmitted through the handle to the door. The door will be subject to this force and remain stable, and will not accidentally close.
The handle is usually made of a strong material, such as metal or plastic, to ensure its durability and reliability. They are carefully designed and installed to withstand the weight and force of passengers while remaining stable and reliable.
In the design of the car handle, it is also necessary to consider the ergonomics of the passenger. The position and shape of the handle are usually adjusted according to the person's body structure and usage habits to provide the best use experience. In addition, the handle also needs to match the opening and closing mechanism of the door to ensure ease of use and safety.
All in all, the car handle provides a stable support point by transferring the force exerted by the passenger to the door, allowing the passenger to easily enter and exit the car. They need to be designed and installed with ergonomics and ease of use in mind to provide the best possible experience.
How to install the outer handle liner of the car?
The installation steps of the external handle liner are as follows: :
Preparation tools : You will need a screwdriver, a wrench, and a new set of door handles. Make sure all the tools are ready for a smooth installation .
Removing the old handle : Use a screwdriver to remove the screws holding the handle, which are usually located on or below the edge of the door. It may be necessary to press firmly against the screwdriver to remove the screw .
Remove door liner : Open door to maximum Angle and push door liner outward. The lining gets stuck between the door and the jamb and requires a bit of force to remove .
Installing a new handle : Align the new handle with the hole on the door, insert a screwdriver into the hole on the handle, and tighten the screw using a wrench. Make sure the handle is aligned with the guide rail on the door .
Reinstall the door lining : Close the door, then re-clamp the lining into the gap between the door and the door frame. If the lining is difficult to install, press the lining along the guide rail with your fingers until it is fully in place .
Check handle function : Open and close the door several times to make sure the new door handle is working properly. If the handle becomes loose or falls off during operation, tighten the screws or use tape to secure the handle .
Through the above steps, you can correctly install the external handle liner of the car to ensure the normal use of the vehicle.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
