Front fog light frame hit a hole in the rain will it affect?
There's a hole in the front fog light frame. It's gonna affect the rain.
First, if the front fog light frame hits a hole, rain may enter the inside of the fog light. In this case, rainwater entering the interior of the fog lamp can cause several problems:
affects lighting effect : rain may scatter light, resulting in poor lighting effect of fog lights, thus affecting the driver's line of sight.
damaged lights : Rain may cause damage to the electronic components inside the fog lights, causing them to not work properly.
safety hazard : when fog lights can not work normally, the driver's sight will be seriously affected, increasing the driving risk, there is a safety hazard.
increase maintenance cost : if the fog lamp is damaged because of water, it needs to be replaced or repaired, it will increase the maintenance cost of the owner.
Therefore, if the front fog light frame is found to be damaged, it should be repaired in time to avoid the above problems caused by rain. If water is already in, some measures can be taken, such as using a high pressure air gun or a hair dryer (set to cold air) to blow moisture prone areas in the engine compartment to speed up air flow and help remove moisture .
Is fog normal in front fog light?
Causes of front fog lights may include:
There are cracks in the fog lamp itself that allow outside moisture to enter.
The fog lamp is damaged by external force , such as collision or falling, making the water vapor enter the inside of the fog lamp.
The sealing ring behind the fog lamp is loose or damaged , allowing moisture in the air to enter.
temperature difference : Turn off the light immediately after using the light for a long time, which is easy to lead to fog.
improper car washing : The use of high pressure water gun to wash the lights may cause water droplets to flow into the exhaust hole, causing the lights to fog.
wading too deep : Once the water depth exceeds the wheel, it will enter the headlight through the vent.
lamp shade damaged : car collision caused the lamp shade damaged, allowing moisture to enter.
Solutions to front fog lamp fog include:
Inspect and repair cracks or broken and replace fog lights with new ones if necessary.
Replace the damaged seal to ensure that it is in good condition.
Use the heat of the lamp to evaporate the water vapor , after the water evaporates, use tape or other sealants to seal the fog lamp.
Check whether the water tank is leaking , whether the glass kettle is damaged, timely maintenance to avoid other failures.
Avoid washing car lights directly with a water gun to prevent moisture from entering.
if the fog is severe , remove the bulb, remove the fog by hand or with a hairdryer, and seal it with glue.
For mild fogging , you can turn on the headlights as normal every day and the fog will clear in about a week.
When dealing with fog in the front fog lights, appropriate measures should be taken according to the specific reasons to ensure the safe use of the vehicle .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
