How to remove the MAXUS G10 front door panel?
Remove the MAXUS G10 front door panel as follows:
To remove the MAXUS G10 front door panel, first locate the small hole next to the door handle, insert a small screwdriver into the hole, gently press down, and pull out the door handle.
The second step, find a plate or steel plate with high hardness, insert it from the gap between the door core plate and the door plate metal, move it to the place where there is a buckle, and slightly pry up the buckle to separate, pry up all the buckle in turn. Be careful to pry slowly to avoid damage.
Third, the top and bottom edges of the door panel are gently pulled out from the door frame.
Step 4, the lower and upper corners of the door panel have hidden buckles, and pop them out with a plastic switch knife or appropriate tool.
Step 5: Be careful when removing electronic devices such as power window switches to avoid damaging wires or related components.
The sixth step, pull the decorative plate from the door, pay attention to the strength, do not overexert, to prevent damage to the decorative plate or other parts.
Step 7: Place the trim on a flat surface and carefully remove all fasteners for easy replacement or cleaning.
In the disassembly process, be careful to operate, do not damage the door panel and body surface. If you are not sure, it is best to find professionals to help, so as not to cause unnecessary losses.
Chase G10 front door abnormal sound how to solve?
The reasons for the abnormal noise of the front door of the Chase G10 may include the unlocking device is stuck, the lock machine is rusty or has foreign objects, the front of the accident, the window is loose, and the interior parts are shaken and rubbed.
unlocking device stuck : If the unlocking device inside the cab does not return to its original position, the cover cable may not return, and the cover lock may be deformed, causing abnormal noise. The solution is to check and repair the unlocking device to return it to its normal position.
The lock machine is rusty or foreign matter : the lock machine is rusty or foreign matter is stuck, which will loosen the screw of the lock machine and move up, resulting in abnormal sound. It is necessary to clean the rust and foreign matter on the lock machine and tighten the screws.
Front accident : An accident at the front of the vehicle may result in incorrect alignment of the sheet metal parts, misalignment of the latch and the lock machine, displacement of the lock machine or breakage of the lock hook, resulting in abnormal noise. The front of the vehicle needs to be repaired, the position of the sheet metal corrected, and the damaged lock or lock hook replaced.
Loose car Windows : Loose car Windows may cause abnormal noise. Check the fixing parts of the window and tighten or replace them.
interior parts vibration friction : interior parts vibration friction may also cause abnormal noise. Specific parts need to be found, reinforced or adjusted.
In short, when there is an abnormal noise at the front door of Datong G10, it should be checked in time to determine the specific cause, take appropriate measures to solve it, and seek the help of professional car masters when necessary .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
