How do I remove a car door handle?
For the removal of car door handles, you need to be careful and follow the correct steps. Let's dive into how to do this seemingly simple task.
1. Left front or right front door handle
First of all, find the handle with the lock key barrel, the process of removal is as follows: start from the outside surface of the door, remove the front door trim and moisture-proof film, this is the key starting point. Next, find the decorative cover of the key cylinder, unscrew the retaining bolt, and gently remove the outer handle cover to reveal the internal structure.
2. Remove the common door handle
For regular door handles, start with the door guard, then remove the door protector, starting at the top left corner. Gently reach into the door, release the latch, and then simply unscrew the handle to make the whole operation a breeze.
3. Remove the interior door handle
The interior handles are removed slightly differently. At the beginning, remove the decorative plate, and then carefully pry open the outer handle decorative cover to avoid damage to the car paint. Remove the handle easily, if you are unsure of the operation, you can seek the assistance of professional 4S shop technicians.
4. Safe disassembly
Finally, make sure to remove the handle screw after removing the security lock latch. This will ensure that the door handle is safely removed from the outside. Exercise caution to avoid damaging other parts of the car.
With these meticulous steps, you can smoothly remove your car door handle and prepare it for the next repair or replacement. Remember to be patient and careful during operation to ensure that the whole process goes smoothly.
What if the door handle is tight?
To solve the problem of the front door handle tight, you can use the following methods :
lubricate with screw loosener : First, remove the screw loosener and lubricate the door lock post. Lightly spray some screw loosener. This will smooth the door lock post, making it easier to open the door. If the door lock is rusty, screw loosener can also remove rust .
Check door handle screws : Check the screws on the door handle for loosening. Prolonged use may cause the screws to loosen, thus making the handle feel tight. Use a proper screwdriver to tighten the screws, but not too tightly; otherwise, the screw holes .
lubricate the door handle : If the screws are OK, the next step is to lubricate the door handle. Apply a special lubricant to the active part of the handle. Make sure the lubricant is evenly distributed and gently move the handle a few times to help the lubricant penetrate .
Check the door internal mechanism : The door handle may be tight because there is a problem with the mechanical mechanism inside the door. Open the door trim panel and check that the pull rods, springs, and other components inside are working properly. If damaged or stuck parts are found, replace or repair them promptly .
Adjusting the car door lock : Sometimes, the improper adjustment of the car door lock can lead to tight hands. Check the position and condition of the door locks and, if necessary, adjust the locks to fit better with the door handles .
Regular maintenance : Regular maintenance is key to avoid tight door handles. Regular inspection and lubrication of door handles and related components can extend their service life and maintain good operating performance .
By following the above steps, you can effectively solve the problem of tight door handles and ensure that the door maintains good operating performance .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
