How to do if the oil cap can't be unscrewed?
oil lid can not be turned on the solution :
waiting for the vehicle to cool : after the engine starts, the internal state of negative pressure is formed, and air is difficult to enter, resulting in large suction of the oil cap and difficult to open. After waiting for the vehicle to cool, the negative pressure decreases and the oil cap can be opened more easily.
Tool assistance : Tools such as pliers can be used to help unscrew the oil cap, but avoid using a wrench to avoid damaging the cap. If it still cannot be opened, it is recommended to seek professional help.
Check whether the oil cap is too tight : if the oil cap is difficult to open because it was screwed too tight last time, you can use tools such as wrench to try to open it, or go to the 4S shop to deal with it.
oil cap tightening direction : The oil cap is usually opened by turning counterclockwise . When reinstalled, it is also turned 90 or 180 degrees counterclockwise to close.
What about oil stains around the oil cap?
There may be oil stains around the oil cap for the following reasons:
poor oil cap seal :
Aging or human damage to the seal may cause the oil cap to be loosely sealed, resulting in oil stains. In this case, it is necessary to replace the seal or oil cap assembly in time to prevent excessive oil loss and even cause more serious failures, such as burning tiles.
oil spatter :
In the process of adding oil, if the oil spills around the oil cap and is not cleaned up, it will also form oil stains. In this case, the oil stain will not have a bad effect, but it will affect the appearance. It can be washed at least three times with oil or gasoline to remove oil stains.
Normal oil penetration :
Oil stains on the oil cap may be normal if they are oil and are not accompanied by a significant reduction in the amount of oil or an expansion of the extent of oil stains. At this time, just wipe it clean and check whether the oil cap is tight.
In summary, oil stains around the oil cap may result from sealing problems, spillage during refueling, or normal oil penetration. According to the specific circumstances, the owner can take corresponding measures to deal with. If the cause of the oil stain cannot be determined or the amount of oil is found to be significantly reduced, it is recommended to go to the professional repair shop for inspection and maintenance in time.
Emergency treatment of oil cap loss
Use tape : Attach a piece of wide tape to the fuel tank cap to prevent it from accidentally opening.
Use plastic lock : Purchase a small plastic lock and lock it to the fuel tank lid to protect it from being opened.
Using string or belt : Make a simple tie around the tank cap with a strong string or belt so that it can be easily re-closed even if the cap is lifted.
Use self-locking clip : Purchase a self-locking clip and attach it to the fuel tank cap to prevent accidental opening.
Use another vehicle's gas tank cap : If conditions permit, you can temporarily use another vehicle's gas tank cap to protect the tank from leaking.
Using plastic sheet or rubber sheet : Find a clean and suitable sized plastic sheet or rubber sheet, cut to slightly larger than the tank mouth, and temporarily secure it to the tank mouth with tape or string.
Safety precautions
Stay calm : Don't panic, because a missing fuel tank cap doesn't mean the vehicle is unusable.
Find professional help : Contact a professional mechanic as soon as possible who can provide a better solution or a new cap.
Avoid using unsafe methods : Do not use unsafe methods to avoid security accidents.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
