EGR valve recall Is it necessary to replace?
The function of EGR valve and the impact of damage .
The EGR valve (Exhaust gas recirculation valve) is an important control component of the automotive engine, which is installed on the engine to control the amount of exhaust gas recirculation fed back into the intake system. When the EGR valve is damaged, it will lead to problems such as unstable idle speed, poor acceleration, increased fuel consumption, and insufficient power. The reason for the recall is usually because the internal components of the EGR valve are corroded by higher concentrations of chlorine in the fuel, resulting in poor operation of the valve body, which can cause engine malfunction, and in extreme cases, the vehicle can stall at low speeds, increasing the risk of a crash.
Reasons and necessity of recall
The reason for the recall is usually because the internal components of the EGR valve are corroded by higher concentrations of chlorine in the fuel, resulting in poor operation of the valve body, which can cause engine malfunction, and in extreme cases, the vehicle can stall at low speeds, increasing the risk of a crash. Therefore, timely replacement of EGR valve is an important measure to ensure the normal operation of the engine and driving safety.
Pros and cons of replacing the EGR valve
Replacing the EGR valve can ensure the normal operation of the engine, avoid problems such as unstable idle speed and poor acceleration, and reduce fuel consumption and insufficient power. However, replacing the EGR valve requires a certain cost and time, and may be necessary if the vehicle has been in use for a long time or has more mileage; However, if the vehicle is used for a short time or has less mileage, you can consider continuing to use the original parts for maintenance.
What is an egr valve?
Exhaust gas recirculation valve
EGR valve is exhaust gas recirculation valve . It is an electromechanical integration product installed on the diesel engine to control the amount of exhaust gas recirculation fed back to the intake system, and is a very important and key component in the exhaust gas recirculation device.
The main function of EGR valve is to control the amount of exhaust gas entering the intake manifold, so that a certain amount of exhaust gas flows into the intake manifold for recirculation. It is usually located on the right side of the intake manifold, near the throttle body, and determines the amount of exhaust gas transmitted to the intake manifold by the degree of opening of the valve controlled by the vacuum tube. By directing the exhaust gas from the engine combustion to the intake manifold to participate in combustion, the EGR valve can reduce the combustion chamber temperature, improve the engine working efficiency, improve the combustion environment, and reduce the engine burden. At the same time, it can effectively reduce the emission of carbon monoxide compounds, reduce knocking, and extend the service life of each component.
In addition, EGR valves are also divided into two types of mechanical and electronic control to adapt to the needs of different engines. In the modern electronically controlled engine, in order to more accurately control the amount of exhaust gas recirculation, the closed-loop control strategy is also adopted, and the phase sensor is set at the EGR valve to sense the working state of the engine in real time, and according to this information, the EGR valve is adjusted to open and close, so as to achieve accurate control of the amount of exhaust gas recirculation.
Car egr valve is broken what symptom does it have?
What are the obvious symptoms you may experience when your car's EGR valve fails?
EGR valve, the exhaust gas recirculation system valve, when it is faulty, the vehicle will appear a series of warning signals. First of all, idling instability or even flameout is a common phenomenon, and the fault light may also flash frequently to remind you to pay attention to the engine status. Secondly, because the EGR valve failure may lead to substandard emissions, the vehicle may face the embarrassment of failing to pass the annual inspection.
If the EGR valve is kept open, the consequences are even more significant: the car will show black smoke and lack of acceleration, while fuel efficiency decreases and fuel consumption increases. On the contrary, if the EGR valve is closed, exhaust emissions will be affected and may directly lead to failure to pass the inspection standards of the annual inspection.
As for the causes of EGR valve damage, there are mainly several aspects: waste gas recirculation system quality problems, improper maintenance, poor oil quality and the aging of the valve itself. For example, the use of low-purity gasoline or the improper addition of fuel oil can become a sudden factor that causes EGR valve failure. EGR valves operate at high engine temperatures, and in the long run, like valve chamber cover pads and rubber rings, they will age due to wear.
Overall, the health of the EGR valve is essential to maintain engine performance and environmental emissions, once the above symptoms are found, professional maintenance should be sought as soon as possible to ensure that driving safety and environmental requirements are met.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
