MAXUS drive shaft ten bytes of action.
Achieve variable Angle power transmission
The main function of the drive shaft cross junction is to achieve the transmission of variable Angle power, for the position that needs to change the direction of the transmission axis, it is the "joint" part of the universal transmission device of the automobile drive system.
The drive shaft cross joint, also known as the cross shaft universal joint, is a crucial component in the automobile drive system. Its main functions include:
variable Angle power transmission : when the car needs to change the direction of the transmission axis, the cross knot can flexibly adjust the direction of the drive shaft to ensure that the car can run smoothly. It allows the maximum intersection Angle of two adjacent axes to be 15° to 20°, and is a widely used unequal speed universal joint in automobiles.
Connect two levers : The cross knot consists of a pair of ordinary hinges with an opposite orientation of 90°, allowing the lever to freely turn in any direction. This design allows the drive shaft to adapt to various Angle changes and maintain the continuity of power transmission.
Ensure the stability of power transmission : the drive shaft and universal joint not only transmit torque, but also ensure the stability of the power transmission of the vehicle during the driving process. They avoid the impact of up and down movement of the rear axle on the driving, improve the comfort and safety of driving.
The importance of dynamic balance : Because the drive shaft is a rotating body with high speed and less support, its dynamic balance is very important. Before leaving the factory, each drive shaft must be strictly tested for dynamic balance and adjusted on a special balancing device to ensure its stability and safety when rotating at high speed.
To sum up, the drive shaft cross knot plays a crucial role in the car drive system, which ensures the flexibility and stability of the car's power transmission during the driving process, and is an indispensable part of modern cars.
Drive shaft ten byte damage precursor
Signs of ten-byte drive shaft damage include:
metal impact : when the car starts or changes speed, especially when it is driving at low speed in high gear, the sound of metal impact on the drive shaft appears. Hum : During driving, the chassis makes a "buzzing" sound, and the faster the speed, the louder the noise. Dynamic balance problem : If there is a problem with the dynamic balance of the drive shaft, it may lead to abnormal wear of the cross shaft, and then produce abnormal noise or jitter. Lack of lubrication : drive shaft cross shaft damage is usually due to long-term lack of lubrication caused by excessive shaft wear.
Drive shaft ten byte damage specific performance
ten-byte damage of the drive shaft includes:
metal impact : when the car starts or changes speed, especially when it is driving at low speed in high gear, the sound of metal impact on the drive shaft appears. Hum : During driving, the chassis makes a "buzzing" sound, and the faster the speed, the louder the noise. Jitter : The failure of the drive shaft will cause the car to produce significant jitter when driving, especially at the time of growth or deceleration. Power decline : as the core component of vehicle power transmission, the damage of the drive shaft will hinder the smooth transmission of power, resulting in insufficient power when the car is running, and the speed becomes slow.
The cause of the drive shaft decbyte damage
The main reasons for the drive shaft ten-byte damage are:
loose flange connection : Loose flange connection of the drive shaft may cause damage to the cross shaft.
Long-term lack of lubrication : Lack of lubrication of the drive shaft will lead to excessive wear between the shafts, which will lead to damage to the cross shaft.
dynamic balance problem : dynamic balance of the drive shaft may lead to abnormal wear of the cross shaft, abnormal noise or jitter.
How to determine whether the drive shaft ten bytes is damaged
How to tell if the drive shaft ten bytes is damaged methods include:
metal impact : when the car starts or changes speed, especially when it is driving at low speed in high gear, the sound of metal impact on the drive shaft appears.
Abnormal steering wheel sound : when turning the steering wheel, if you hear the sound of clicking, it may be the performance of the cross shaft damage.
chassis abnormal sound : during the driving process, the chassis makes a "buzzing" sound, and the faster the speed, the greater the noise.
How to solve the drive shaft ten-byte damage
How to solve the drive shaft ten-byte damage methods include:
regular inspection and lubrication : The owner should regularly check the lubrication of the drive shaft to ensure that it is in good working condition.
professional maintenance : If you find that there is a problem with the drive shaft, you should go to the professional maintenance station in time for inspection and maintenance.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
