Saic Chase g10 right door inside handle how to remove?
The following are the detailed steps for removing the handle inside the right middle door of SAIC Maxus G10:
First of all, prepare the appropriate tools, such as screwdrivers.
Next start disassembling:
1. Remove the door guard, starting from the upper left corner slowly tear.
2. Then remove the door protective film.
3. Reach inside the door, find the latch and remove it.
4. Next, look for and remove the door handle screws from the side of the door.
It should be noted that the disassembly method of different models may be different, and the disassembly of the right middle door inner handle of SAIC Chase G10 may also be different. Moreover, it is also necessary to separate the left and right front and back doors, and there are differences in the demolition method.
If you are not a professional maintenance personnel, it is best not to disassemble yourself, so as not to damage the vehicle parts. Without a detailed tutorial, it's easy to break other things, and the gains outweigh the losses. It is recommended that you go to a professional 4S shop or find an experienced maintenance personnel to operate.
Chase G10 door handle can not open the door of the reason?
The reasons for the failure of the handle inside the door of Datong G10 may include the locking of the child lock in the middle door lock block, the cable problem in the door that controls the opening of the door lock, the damage of the internal contact of the micro-switch, the line problem, the door control lock in the open state, the door limiter failure, the door freeze, the door buckle problem, the hinge or lock column deformation, the child lock opening, etc.
Solutions to these problems include:
Check and unlock middle door block child lock.
Check if there is a problem with the cable in the door that controls the door opening and repair it.
Replace the damaged microswitch.
Check whether the line has a break, short circuit or poor contact, and repair.
Make sure the door center lock is closed.
Replace the faulty door stopper.
Deal with freezing doors.
To check whether there is a problem with the door buckle, try wrapping tape on the door buckle.
Check the hinge or lock post for deformation, if deformation needs to be replaced by a repair shop.
Check that the child lock is open. If it is open, turn it off by flipping the switch.
Most door handle faults can be solved .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
