Where is the MAXUS G10 crankshaft front oil seal?
Engine belt side
The crankshaft front oil seal is located on the engine belt side.
The crankshaft front oil seal is an important part in the engine, and its position is very important for the normal operation of the engine. Specifically, the crankshaft front oil seal is located on the engine belt side, a position designed to ensure that lubricating oil inside the engine does not leak to the outside of the engine. The main function of the crankshaft front oil seal is to prevent the oil from leaking out from the inside of the engine and maintain the pressure and lubrication state inside the engine. If the crankshaft front oil seal is damaged or aged, it may lead to oil leakage, which will affect the normal operation of the engine. Therefore, timely inspection and replacement of crankshaft front oil seal is of great significance to maintain engine performance and extend its service life.
In addition, the position of the crankshaft rear oil seal is connected to the gearbox, which is also designed to prevent the leakage of lubricating oil. When the crankshaft oil seal (including the front oil seal and the rear oil seal) is damaged, it will lead to oil seepage problems, which will affect the normal operation of the engine. Therefore, for car users, understanding the location and importance of the crankshaft oil seal helps to discover and solve problems in time during daily maintenance and avoid greater failures caused by oil seal damage.
Causes of oil leakage from crankshaft front oil seal.
The specific reasons for the crankshaft front oil seal leakage are as follows:
1, assembly: crankshaft rear bearing surface has twill, due to different texture depth, so the crankshaft sealing effect is not good or abnormal wear and tear and oil leakage. And during the assembly process, it is easy to scratch the oil seal seal, which will lead to oil leakage
Solution: Be careful not to scratch the oil seal when assembling.
2, design: In the design, the crankshaft oil seal has two layers of design, but the crankshaft can not effectively compensate the wear part of the second layer seal, resulting in the wear part of the seal is not tight.
Solution: It is recommended to replace the crankshaft at the repair shop.
3, oil: the use of unreasonable or no use of original oil, it is easy to damage the crankshaft oil seal, so that it can not form an effective oil film, which will accelerate the wear of the oil seal lip.
Solution: Use oil reasonably or use original oil.
4, maintenance: there may be some engine maintenance, so it is likely that the car in the maintenance, the staff operation is not standardized, the oil seal assembly is not in place, resulting in a tight seal, resulting in oil leakage.
Solution: Find professional staff to repair.
5, engine: if the car engine is used for a long time, it is likely to lead to the aging of the crankshaft oil seal and rupture and oil leakage.
Solution: It is recommended to check or repair the engine at the repair shop.
Related expansion
Crankshaft oil seal is an important seal on the engine powertrain, if the crankshaft oil seal leaks, it will not only waste oil, pollute the environment, but also accelerate the wear of parts, affecting the service life of the engine, so we must pay attention to it and replace the parts in time.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
