Is the brake fluid sensor normally on or normally off?
Brake fluid sensor is normally on. That is, it is in the disconnected state under normal circumstances.
Brake fluid sensor A wire used to control the brake fluid warning light. It is installed in the brake oil pot, controlled by the float, there are two wires on it, one wire is connected to the iron, the other wire is connected to the brake oil warning light.
When the brake oil is enough, the float is at a high level, the switch is off, and the brake oil light is not on. When the brake oil is not enough, the float is at a low level, the switch is closed, and the light is on.
Brake oil level sensor is an important part of the brake system, if it fails, it may affect the brake performance. So, how to determine whether the brake oil can oil level sensor is broken?
First of all, you can observe the prompt on the dashboard, and if the sensor fails, there will usually be a corresponding warning light. Secondly, pay attention to the brake foot sense and braking distance, if the brake oil level sensor is faulty, it may cause the brake oil level display to be inaccurate, thus affecting the braking effect.
In addition, it is also important to regularly check the quality and water content of the brake oil. If the brake oil is cloudy, the boiling point drops or the water content is too high, it may affect the brake performance and even lead to brake failure. It is recommended that after the vehicle is driven for 50,000 kilometers, check the brake oil during each maintenance.
If you find that the brake is soft, the braking distance becomes longer or the brake runs off, you should also check the brake oil and oil level sensor in time. In order to drive safely, once the brake oil level sensor is found to be faulty, it is recommended to replace it in time.
The brake oil level sensor is a key component in the automobile brake system, and its failure may affect the braking performance. To determine whether the sensor is damaged, you can observe the dashboard prompt, pay attention to the brake foot feeling and braking distance. Check the quality of brake oil regularly, such as turbidity, reduced boiling point or high water content, should be replaced in time. After the vehicle has been driven for 50,000 kilometers, the brake oil should be checked for each maintenance. Brake oil and oil level sensors should also be checked when soft braking, longer braking distance or deviation is found. For safety, the sensor should be replaced in time when it is faulty.
Take out the sensor, see if there is a prompt on the instrument, if not, it is broken, directly replace it:
1, usually pay attention to the brake foot feeling, and braking distance, if the brake oil is not replaced in time, it will lead to turbidity of the brake oil, the boiling point decreases, the effect becomes worse, resulting in brake failure;
2, because the brake oil system will always wear, and low-end brake oil impurities, which will lead to accelerated wear of the brake pump and brake system oil circuit blockage;
3, expired brake oil braking effect is not ideal, just because the owner of a long time to adapt to their own vehicles, so not aware, in order to safe driving recommended to replace immediately;
4, when the vehicle mileage of more than 50,000 kilometers, should be checked in each maintenance of the brake oil water content, more than 4% should be replaced in time;
5, in addition, for the existence of soft braking, braking distance becomes longer, brake deviation and other phenomena also need to check the brake oil in time.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAUXS auto parts welcome to buy.
