PriceList for Maxus T60 Accessories Factory - SAIC brand original Half shaft bearing for MAXUS V80 C00002155 – Zhuomeng
PriceList for Maxus T60 Accessories Factory - SAIC brand original Half shaft bearing for MAXUS V80 C00002155 – Zhuomeng Detail:
Products information
| Products name | Half shaft bearing |
| Products application | SAIC MAXUS V80 |
| Products OEM NO | C00002155 |
| Org of place | MADE IN CHINA |
| Brand | CSSOT /RMOEM/ORG/COPY |
| Lead time | Stock,if less 20 PCS,normal one month |
| Payment | TT Deposit |
| Company Brand | CSSOT |
| Application system | Chassis system |
Products knowledge
Maintenance attention
In the maintenance process, it is often found that some cars have a large driving noise, check the tires for abnormal wear, and turn the wheels on the lift without obvious abnormal noise. This phenomenon is often caused by abnormal damage to the hub bearing. The so-called abnormal refers to the bearing damage caused by the installation. The front wheel bearing of the car is generally a double-row ball bearing. When installing the bearing, if you use a hammer to knock the installation, or install the bearing by pressing the inner ring of the bearing when installing the bearing into the bearing seat, it will cause one side of the bearing raceway. damage. Noise is generated when the vehicle is driving, and when the wheels are off the ground, there is no obvious noise due to the better side of the raceway. Correct installation operation is the key to long bearing life.
What happens to the damaged car wheel bearing
When one of the four wheel bearings of the vehicle is damaged, you will hear a continuous humming sound in the car while the car is running. It’s full of this hum, and it gets louder the faster you go. The following is the judgment method:
Method 1: Open the car window and listen to whether the sound comes from outside the car;
Method 2: After increasing the speed (when the humming sound is louder), put the gear in neutral and let the vehicle slide, and observe whether the noise comes from the engine. If the humming sound does not change when sliding in neutral, it is probably a problem with the wheel bearings;
Method 3: Stop temporarily, get off the car and check whether the temperature of the axle is normal. The method is: touch the four hubs with your hands, and roughly feel whether their temperatures are the same (when the brake shoes and pads have normal gaps, the temperature of the front and rear wheels is If there is a gap, the front wheel should be higher), if you feel that the difference is not big, you can continue to drive slowly to the maintenance station;
Method 4: Raise the car with a lift (release the handbrake and put it in neutral before), when there is no lift, you can lift the wheels one by one with a jack, and turn the four wheels quickly by manpower. When encountering a problematic axle, it will send out The sound is completely different from other axles. Using this method, it is easy to tell which axle has the problem.
If the hub bearing is seriously damaged, there are cracks, pits or ablation on it, it must be replaced. Apply grease before installing new bearings, and then reassemble them in reverse order. The replaced bearings must rotate flexibly and have no confusion and vibration.
Related products
FAQ
1.How to find CSSOT parts ？
1. www.saicmgautoparts.com
2. www.buymgautoparts.com
3. www.cssot.en.alibaba.com
4. And some can find from google ,search “mg auto parts “ or “zhuo meng (shanghai) automobile co.,ltd.
2.If you can give us EXW/FOB/CNF/CIF price if we cooperate ?
Of course !
1. if you want EXW price ,then you pay us company account ,and you should help us custom for products !
2. if you want FOB price ,then you pay us company account ,and you should help us custom for products and you tell me which port you may carry and we check all cost and quote you !
3. if you want CNF price ,then you pay us company account , we find shipper and help us our products successful to your port ,without any insurance!
4. if you want CIF price ,then you pay us company account , we find shipper and help us our products successful to your port ,with insurance for products !
3.which parts can find from your company CSSOT?
Brand or ORG SAIC MG &MAXUS ato parts
4.Can we visit your company and after check we can cooperate
due to virus
1. if you are in china ,you can come directly and we will show for you and make simple introduction to our company and products !
2. If you are not in china
First suggestion ,if you have reliable supplier you can let them come our company directly and help you find our company if can cooperate !
Second suggestion ,we can make online meeting and we can show you in our company and you can check all online and try to cooperate !
5.if we can make sample first and took our country ,if all ok(size,function ),we can make mass order ?
Yes,we can support you this way to let you believe us
OUR EXHIBITION
Good Feetback
Product detail pictures:
Related Product Guide:
In an effort to provide you advantage and enlarge our business enterprise, we even have inspectors in QC Staff and assure you our greatest provider and item for PriceList for Maxus T60 Accessories Factory - SAIC brand original Half shaft bearing for MAXUS V80 C00002155 – Zhuomeng , The product will supply to all over the world, such as: Greece, Ecuador, Ethiopia, The company attaches great importance to product quality and service quality, based on the business philosophy "good with people, genuine to whole world, your satisfaction is our pursuit". we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
By Kevin Ellyson from Uruguay - 2018.02.21 12:14
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Atalanta from Zurich - 2017.06.29 18:55
