The installation method of automobile headlamp is as follows:
1. When replacing the headlamp bulb of a car, first of all, it is necessary to confirm the bulb plug of the car, and buy the bulb with the corresponding socket for replacement. The replaced bulb does not necessarily need original accessories, as long as the bulb is fixed;
2. Unplug the power socket of the bulb. When unplugging the power socket of the bulb, the force shall be moderate to avoid loosening the socket wiring or damaging the bulb plug;
3. Put the new bulb into the reflector and align it with the fixed clamping position of the bulb. There are several fixed clamping positions on the bulb base. During installation, reverse the steps of taking out the old bulb: hold the steel wire circlip, insert the bulb into the reflector, align it with the installation position, and then loosen the circlip to fix the bulb. Put the new bulb into the reflector and align it with the fixed clamping position of the bulb. There are several fixed clamping positions on the bulb base. During installation, reverse the steps of taking out the old bulb: hold the steel wire circlip, insert the bulb into the reflector, align it with the installation position, and then loosen the circlip to fix the bulb. The specific criteria for selecting new bulbs are: close parameters, the same structure and meeting the requirements of annual inspection. The parameters of the new and old bulbs in the figure are 12v6055w, which are H4 three pin plugs. The correct way to take the bulb is to wear gloves and take the base or plug position of the bulb to avoid direct contact with the glass body. If there is dirt on the glass, there is a risk of bursting when the light is on.
