Free sample for Mg 3 Spare Parts - RX5 Clutch Master Cylinder 10096276 10648591 – Zhuomeng

Products information

Product Knowledge

Clutch master cylinder

When the driver depresses the clutch pedal, the push rod pushes the master cylinder piston to increase the oil pressure and enters the slave cylinder through the hose, forcing the slave cylinder pull rod to push the release fork and push the release bearing forward; When the driver releases the clutch pedal, the hydraulic pressure is released, the release fork gradually returns to the original position under the action of the return spring, and the clutch is engaged again.

There is a radial long round through hole in the middle of the piston of the clutch master cylinder. The direction limiting screw passes through the long round hole of the piston to prevent the piston from rotating. The oil inlet valve is installed into the axial hole at the left end of the piston, and the oil inlet valve seat is inserted into the piston hole through the straight hole on the piston surface.

When the clutch pedal is not pressed, there is a gap between the master cylinder push rod and the master cylinder piston. Due to the limit of the direction limiting screw on the oil inlet valve, there is a small gap between the oil inlet valve and the piston. In this way, the oil reservoir is connected with the left chamber of the master cylinder through the pipe joint, oil passage and oil inlet valve. When the clutch pedal is pressed, the piston moves to the left, and the oil inlet valve moves to the right relative to the piston under the action of the return spring, eliminating the gap between the oil inlet valve and the piston.

Continue to press the clutch pedal, the oil pressure in the left chamber of the master cylinder increases, and the brake fluid in the left chamber of the master cylinder enters the booster through the oil pipe. The booster works and the clutch is separated.

When the clutch pedal is released, the piston moves rapidly to the right under the action of the same position spring. Due to the certain resistance of the brake fluid flowing in the pipeline, the speed of returning to the master cylinder is slow. Therefore, a certain vacuum degree is formed in the left chamber of the master cylinder, and the oil inlet valve moves to the left under the action of the pressure difference between the left and right oil chambers of the piston, A small amount of brake fluid in the oil reservoir flows into the left chamber of the master cylinder through the oil inlet valve to make up for the vacuum. When the brake fluid originally entering the booster from the master cylinder flows back to the master cylinder, there is excess brake fluid in the left chamber of the master cylinder, and the excess brake fluid will flow back to the oil reservoir through the oil inlet valve.

FAQ

1. If you can send some products as gift if we buy mass ?

Yes, when you buy from us, we will help you some products as gift for you, no need any cost for you. 

2. I want to talk with you, but time different, how to solve ?

Yes, its trade, we can help you with order in your time till all solved.

3. What time do you work ? if i will disturb you ?

NO, you will not disturb me, All the time by your free time we can serve you !

4. How to find right products for me?

1. Search for products name
2. Find from website catalog
3. Give us picture
4. Take picture for us and find OEM NO from products 

5. Any one I can talk directly ?

Sweety

wechat/whatsapp/phone :+8615000373524

email:mgautoparts@126.com

6. Can we get discount from you ?

Yes, buy mass, we can give you big discount !

7. Can we pay your company fixed depoist ?

Yes, fixed deposit you can pay us, when you wanna make order and confirmed  and we can use your deposit and prepare your products as list !

8. If we can get some certificate to clear for our products ?

Yes, we can, if all cost bear by your company, we can help you do these certificate and help you do all so that we can send out successfully !

9. If you want to do saic package/label for me ?

NO, SAIC will find this, if you wanna make it and you can make it in your place and print it on box !but products same with SAIC one !

10. If you can tell me how to install if I bought from you ?

Sorry, this we can not help you, you can buy our products and take it to your local car center and with professional man to help you install, otherwise, if install wrong, products will broken with some other parts together !it need more care!

ALL we can solve for you ,CSSOT can help you for these you puzzled ,more detailed please contact 

certificate

exhibition