Products name | outside handle |
Products application | SAIC MAXUS V80 |
Products OEM NO | C00002271 |
Org of place | MADE IN CHINA |
Brand | CSSOT /RMOEM/ORG/COPY |
Lead time | Stock,if less 20 PCS,normal one month |
Payment | TT Deposit |
Company Brand | CSSOT |
Application system | Body system |
How to put the car door handle back: first unscrew the three screws on the door. The upper and lower screws are the middle screws that hold the lock in place. At the same time, hold the outer door handle by hand to avoid falling off, and remove the outer door handle and cover. Note that the cover screws are not dislodged and are missing. Install the inner handle and rotate the screw holes outward. Then tighten with a screwdriver. This will hold the door handle in place and pull everything by hand several times to see if it is normal, firm and flexible.
Sometimes the door handle is broken, you can check the reason yourself, you can open the door panel and check if the parts inside are stuck, if it is stuck you can put some butter in the screwdriver, if it is due to other problems, such as the induction handle, then It’s not the user’s hand, you should go to the garage or 4S shop, don’t drive it yourself, other things that are easy to break without experience, no refund.
Different car designs have different types of door handles. The front door handle on the market has a solid handle, the main feature is the thick feel, it is an early product.
The solution for the door handle falling off is to re-install, the installation method is: 1, release the control; 2. Use a Phillips screwdriver to pry off the nut and a Phillips screwdriver to unscrew the nut counterclockwise. Use a flat-blade screwdriver to remove the handle trim box and the screws inside; remove the door panel; remove the small speaker wire and inner pull wire; reinstall the door handle. Door handle type: 1. Solid door handle: The main feature of a solid door handle is the thickness of the handle, which is not much in modern society; Hollow handle: This door handle is designed for the back of the hollow handle, which solves the shrinkage of the surface of the traditional handle and improves the deformation and deformation of the handle. bending. Hollow handle: There is a hollow handle in the middle. The mold of the hollow door handle is complicated, which increases the technical difficulty.