Car water tank lower beam assembly function
The main function of the lower beam assembly of the car water tank includes the following aspects :
Improved installation stability : The lower tank beam component assembly improves the installation stability of the tank beam by integrating into the existing tank fixtures. This design eliminates support ribs and connection points in the tank fixtures, simplifying construction, enabling lightweight, and increasing mounting space in the front compartment .
Ensure the torsional rigidity of the frame and bearing longitudinal loads : the lower beam assembly of the water tank can ensure the torsional rigidity of the frame and the ability to bear longitudinal loads. It is connected by riveting to ensure sufficient strength and stiffness to effectively cope with the load of the car and the impact of the wheel .
Supporting key vehicle components : The sub-assembly also undertakes the important task of supporting key vehicle components, such as the engine and suspension system, while absorbing and disperses the impact force from the front and bottom, improving the overall performance and safety of the vehicle .
Protection water tank and condenser : The lower beam assembly of the water tank is used as the support structure to fix the water tank and condenser, to ensure that these parts maintain a stable position and play a normal function when the vehicle is running. It also shares the pressure and weight of the inside and outside of the water tank to ensure the safety and stability of the water tank .
The causes and solutions of the failure of the lower beam assembly of the automobile water tank mainly include the following situations:
settlement or deformation : Long-term use or improper maintenance may cause settlement or deformation of the lower beam of the tank. If there is settlement, you can use the adjusting bolt to adjust slightly; If there are problems such as deformation, it is necessary to replace the lower beam of the tank .
crack or break : Under special circumstances, cracks or breaks may occur in the lower beam of the tank. At this time, the new lower beam of the water tank should be replaced in time .
welded joint falling off : Because the lower beam of the tank is usually connected by welding, the welding joint may fall off during use, resulting in the loss of bearing capacity of the beam. At this time, it is necessary to re-weld or replace a new lower tank beam .
Prevention and maintenance recommendations :
regular inspection : regularly check whether there are problems in the lower beam of the water tank, and timely maintenance and repair are found, which can greatly extend the service life of the water tank .
Use the right water tank : when buying a water tank, you should choose the right model and specification according to the demand, to avoid the problem of the beam due to the poor quality of the water tank .
The lower cross beam assembly of the automobile water tank is a part of the automobile body structure, located between the front axle, connecting the left and right front longitudinal beams. Typically made of high-strength steel, this component supports the vehicle, protects the engine and suspension, and absorbs and disperses impact forces from the front and bottom .
During the repair or replacement process, it may be necessary to remove the wiring harness clip inside the upper beam of the tank, the air filter assembly, the right headlight and fan frame assembly .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
