Car taillight does not flow how to go
The main reasons for car taillights not flowing include the following :
Lamp damage : the tungsten wire of the lamp is burnt or the glass body of the lamp is broken, resulting in the taillight can not shine .
blown fuse : A circuit fault may cause a blown fuse to prevent the taillight from working .
line fault : circuit problems, such as short circuit, open circuit, etc., will lead to taillight not on .
controller module fault : If the controller module is faulty, the taillight is off .
taillight switch fault : the taillight switch is damaged or in poor contact. .
relay or combination switch failure : a relay or combination switch failure will cause an open circuit and the taillight will not turn on .
poor lamp contact : loose bulb wiring or poor contact, will also lead to taillight not on .
automobile line aging : line aging is easy to lead to short circuit, affecting the use of taillights .
xenon lamp ballast failure : if the vehicle uses xenon lamps, the failure of the ballast can also cause the lamp not to light .
The solution :
Check the bulb : make sure the bulb is not burned out and the main lamp holder is intact .
Check the fuse : If the fuse is blown, you need to replace it with a new fuse and test again.
Check the circuit . Use a multimeter or test lamp to find and repair the broken part .
Check the relay and switch combination : if the relay or switch combination is damaged, it needs to be repaired .
Check the contact of the bulb : ensure that the bulb is securely connected and not loose .
Check the car wiring : if the wiring is aging, you need to replace the aging wiring harness .
Check xenon lamp ballast : if using xenon lamp, check that the ballast is working .
If the above steps do not resolve the problem, it is recommended to take the vehicle to a professional repair shop for inspection and repair to ensure a safe and accurate diagnosis .
The main function of car taillights is to provide lighting and warning . Taillights usually include brake lights, turn signals and position lights, etc. Their main role is to ensure the visibility of the vehicle when driving or parking, so as to ensure driving safety.
: The main function of brake lights is to inform vehicles behind you that you are braking to prevent rear-end collisions. Brake lights are usually red because it stands out the most among colors and is easily noticed by other drivers .
: Turn signals are used to signal to other vehicles and pedestrians that you are about to make a turn. Its flashing frequency and brightness are strictly calculated to ensure road safety .
position light : The position light is used to show the width and height of a vehicle, helping other drivers to better judge the distance and parking space .
In addition, the streamer effect of the taillight is usually achieved through circuit control, and if the streamer effect does not work, it may be due to the following reasons:
bulb damage : the tungsten wire of the bulb is burnt or the glass body of the bulb is broken, which will cause the taillight to not glow .
blown fuse : the fuse in the circuit may be blown due to a short circuit, causing the taillight to not work normally .
line fault : circuit problems such as short circuit, open circuit, etc., will also lead to taillights not on .
Controller module fault : The controller module fault may affect the normal working of the taillight .
taillight switch failure : taillight switch damage or poor contact will also cause the taillight not on .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
