2022 Good Quality Mg Rx8 Parts Catalogue - Professional Zhuo Meng Supplier For MG6 Head Lamp 10012109 – Zhuomeng

Products information

MG6 Head Lamp 10012109

Is the headlight rain fog mode necessary?

The rain and fog modes of headlights are: 1. The function of fog lighting is realized by increasing the brightness of LED lamp group and low illumination angle and scattering illumination range; 2. Now many cars have cancelled the front fog lamp. In order to deal with the bad weather conditions such as rain and fog, the headlights of some models have rain and fog mode; 3. When this function is turned on, the illumination range of the headlamp can be increased and the glare caused by rain fog reflection can be reduced. Headlight rain fog mode is very necessary.

MG ZS Head lamp 10787347

The headlamp is a very important part of the structure of the car. The quality seriously affects the driving state of the whole car and even brings danger. Therefore, when purchasing this part, you must carefully purchase and strictly control it. Zhuo Meng (Shanghai) Automobile Co., Ltd. will bring you the most pleasant shopping experience, the most considerate shopping service, the most sincere after-sales and the best quality products, Welcome to consult.

MG MG5 Head lamp 10423090

Headlamp maintenance

1. Daily inspection: carefully check whether the lamps work normally, such as steering lamp, fog lamp, tail lamp, etc. in addition, check whether the irradiation direction of the headlamp is offset, whether there is sufficient light brightness, and the sealing of the headlamp. Find problems in time to avoid accidents.

2. Regularly replace the bulb: the car lamp also has a fixed service life. For a long time, it will darken even if it will not break down, and the irradiation distance will become shorter, which will directly affect driving at night. Generally speaking, the brightness of headlamp bulbs will weaken every 50000 km or 2 years.

3. Often clean the lampshade: it is inevitable that the lampshade will be splashed with water or mud during driving. Although the sealing of the lampshade is very good, the stains on the lampshade will not only affect the beauty of the vehicle, but also directly affect the lighting situation. Therefore, it is recommended to often scrub the lampshade

MG MG5 Head lamp 10423090

Headlamp maintenance

1. Daily inspection: carefully check whether the lamps work normally, such as steering lamp, fog lamp, tail lamp, etc. in addition, check whether the irradiation direction of the headlamp is offset, whether there is sufficient light brightness, and the sealing of the headlamp. Find problems in time to avoid accidents.

2. Regularly replace the bulb: the car lamp also has a fixed service life. For a long time, it will darken even if it will not break down, and the irradiation distance will become shorter, which will directly affect driving at night. Generally speaking, the brightness of headlamp bulbs will weaken every 50000 km or 2 years.

3. Often clean the lampshade: it is inevitable that the lampshade will be splashed with water or mud during driving. Although the sealing of the lampshade is very good, the stains on the lampshade will not only affect the beauty of the vehicle, but also directly affect the lighting situation. Therefore, it is recommended to often scrub the lampshade

MG ZS Head Lamp 10229980

Usually, when you encounter fog in the headlights, as long as you use the headlights normally, they will completely disappear in about a day or two. If the situation is particularly serious, you can open the rear cover of the waterproof cover of the automobile lighting headlamp, then open the headlamp, let the hot air generated by the headlamp blow dry the internal water mist, and then wear the waterproof cover after cooling and drying.

Then there is serious fogging (the fog will form water droplets and begin to flow, forming ponding, etc.). The causes of such fogging and water ingress may usually be the rupture of the headlamp assembly, the falling off of the dust cover, the absence of the rear cover, the holes in the dust cover, the aging of the sealant, etc. How to solve the problem of water ingress and ponding in automobile headlights? If this happens to your car’s headlamp, you usually need to go to a professional lamp refitting shop to turn on the lamp for maintenance, refill the glue and seal, and the lamp refitting shop has a warranty for the sealing of the headlamp. For example, the sealing process of xinpa lamp headlamp in Chengdu lamp refitting shop is a lifetime warranty, so there is no need to worry at all. Or replace the headlamp assembly with a new one. If the headlamp water accumulation continues, the aging of headlamp components will be accelerated, or short circuit will be caused, resulting in spontaneous combustion of the vehicle. This problem should not be underestimated.

MG MG6 20 Head Lamp L 10677385

Automobile headlamp structure – reflector

Most of the closed vacuum wick reflectors are paraboloids formed by parabola rotation. In the production process of reflector, aluminum is evaporated and coated on the inner surface by vacuum coating process. It has very high brightness, which can increase the brightness of the reflected light by more than 6000 times than that of the filament itself.

MG MG6 20 Head Lamp 10677386

Structure of automobile headlamp – hood

A light shield (light shield) is equipped above the front of the filament in the vacuum wick. Its function is to block the upward direct light when the filament is lit. If the upward light of the car headlamp is not blocked, it will cause serious glare to the driver of the oncoming vehicle, and these scattered light will form a light curtain in front of the car in rainy or foggy days, reducing the visibility of the driver of the car.

FAQ

1. How to find right products for me?

1. search for products name.

2. Find from website catalog.

3. Give us picture.

Take picture for us and find OEM NO from products

2. Is it acceptable for online order ? what payment terms do you prefer?

Yes, we accept it, you can choose from ALIBABA online trade assure order and ALIBABA will protect our trades.

TT more prefer, its easy to do and you can rate us Deposit, after all satisfied.

3. What information do I need to provide for a quotation? Do you have a product quotation form?

First, you need give me OEM number or picture if you can find from your broken parts or local market Second, if products no this number, you can take picture for what you need, car ?

We do not have MOQ, but we suggest you buy more parts, because if you buy less, but freight is much, will not accept from you, if freight higher then products cost.we prefer wholesales, government items, trade company from china and abroad can work with us and we will service you till you satisfied.

4. If we can get some certificate to clear for our products ?

Yes, we can, if all cost bear by your company, we can help you do these certificate and help you do all so that we can send out successfully!

5. If you want to do saic package / label for me ?

NO, SAIC will find this, if you wanna make it and you can make it in your place and print it on box !but products same with SAIC one !

6. If you can give us EXW/FOB/CNF/CIF price if we cooperate ?

Of course !

1. if you want EXW price, then you pay us company account, and you should help us custom for products !

2. if you want FOB price, then you pay us company account, and you should help us custom for products and you tell me which port you may carry and we check all cost and quote you !

3. if you want CNF price, then you pay us company account,  we find shipper and help us our products successful to your port, without any insurance!

4. if you want CIF price, then you pay us company account,  we find shipper and help us our products successful to your port, with insurance for products !

ALL we can solve for you ,CSSOT can help you for these you puzzled ,more detailed please contact

certificate

exhibition